Original Wiper Arms
Discussion
I'm getting mine from Clever Trevor:
http://www.clever-trevor.net/search.html?search=wi...
R
http://www.clever-trevor.net/search.html?search=wi...
R
Edited by ralphy12345 on Thursday 4th November 00:32
Thanks.
Would you recommend using them with traditional style curved blade with washer jet built in.
Or the newer aero style curved blade again with washer jet.
My main issue is that after a run out the passenger arm ends about 4-5 inches further up the screen due to free play at the hinge.
Would you recommend using them with traditional style curved blade with washer jet built in.
Or the newer aero style curved blade again with washer jet.
My main issue is that after a run out the passenger arm ends about 4-5 inches further up the screen due to free play at the hinge.
While still on a wiper topic.
I used to have some blades in the mid 80's where the washer tube connected to the end of the rubber blade.
The blade then had about 20 holes either side of the wiper strip so water came out on the up and down sweep of the blade.
Does anyone remember that style or even used them.
I used to have some blades in the mid 80's where the washer tube connected to the end of the rubber blade.
The blade then had about 20 holes either side of the wiper strip so water came out on the up and down sweep of the blade.
Does anyone remember that style or even used them.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


