Oil pressure gauges, same old, same old.
Discussion
Now we know that the electrical oil pressure gauges aren't that accurate.
My pressure has been reading lower then normal for the last few months but I wasn't too worried as I thought it was probably the gauge, (30 psi cruising).
Changed the oil and filter yesterday and went for a drive, pressure was a tad up and stayed a tad higher on idle.
Come the end of the drive on my fav sweeping nearly flat out bend, glancing at the gauge, (paranoid), on the straight it was reading close to 50 psi and idleing at close to 30 psi.
When I used the car a couple of hours later the readings were as before.
What's happening, is the gauge, sender, pressure release valve or something else playing up?
Secondly,
I will definitely fit a mechanical gauge, is there one to match my dials, satin chrome bezel with off/white face?
I appreciate any input.
My pressure has been reading lower then normal for the last few months but I wasn't too worried as I thought it was probably the gauge, (30 psi cruising).
Changed the oil and filter yesterday and went for a drive, pressure was a tad up and stayed a tad higher on idle.
Come the end of the drive on my fav sweeping nearly flat out bend, glancing at the gauge, (paranoid), on the straight it was reading close to 50 psi and idleing at close to 30 psi.
When I used the car a couple of hours later the readings were as before.
What's happening, is the gauge, sender, pressure release valve or something else playing up?
Secondly,
I will definitely fit a mechanical gauge, is there one to match my dials, satin chrome bezel with off/white face?
I appreciate any input.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


