Mirror electrics
Discussion
There are two totally different methods of controlling the mirrors depending on the age of the car. Early cars had a black joystick that controls the mirrors directly (via relays?); later cars had an oval aluminium switch that controls the mirrors via an ECU.
The mirror itself is mounted on an assembly that contains two separate motors, one for horizontal adjustment, the other vertical.
Check the connections to the offending mirror behind the nearside speaker. If you have the black switch, check the connections to it behind the offside door speaker. If you have the aluminium switch the fault's not likely to be at the switch itself as both mirrors would be likely to exhibit the same problem.
The mirror itself is mounted on an assembly that contains two separate motors, one for horizontal adjustment, the other vertical.
Check the connections to the offending mirror behind the nearside speaker. If you have the black switch, check the connections to it behind the offside door speaker. If you have the aluminium switch the fault's not likely to be at the switch itself as both mirrors would be likely to exhibit the same problem.
On one of my Chimaera rebuilds....I have in the past replaced parts of the wiring loom to the drivers door (broken wires)...looks like I will need to replace the door loom full stop....Thanks spend, I just wanted to do the the properly and replace the switches/relays and I cannot find a number.
Adrian
Adrian
Gassing Station | Chimaera | Top of Page | What's New | My Stuff






R