a few little questions......
Discussion
im sort of 2/3 of the way through my Epic engine mount replacement + many other small jobs, and have a few little questions that y'all may be able to help with:
1. Im thinking of using hex-head bolts when i put the manifolds back on, is this a good plan? or wont i be able to get enough torque on them without stripping the hex out.
2. is it good / bad / indifferent to use stainless bolts for the manifold-to-head?
3. where can i get the heat shield material for the engine bay? mine's pretty shagged.
thanks!
1. Im thinking of using hex-head bolts when i put the manifolds back on, is this a good plan? or wont i be able to get enough torque on them without stripping the hex out.
2. is it good / bad / indifferent to use stainless bolts for the manifold-to-head?
3. where can i get the heat shield material for the engine bay? mine's pretty shagged.
thanks!
darkcat said:
im sort of 2/3 of the way through my Epic engine mount replacement + many other small jobs, and have a few little questions that y'all may be able to help with:
1. Im thinking of using hex-head bolts when i put the manifolds back on, is this a good plan? or wont i be able to get enough torque on them without stripping the hex out.
Get a set of ARP studs from ACT - not hex head but they have smaller heads than normal and are easy to get to with a 3/8" spanner (you'll need to make sure you check the tightness a couple of times after fitting as they seem to come loose the first time you fit them..)
2. is it good / bad / indifferent to use stainless bolts for the manifold-to-head?
- Indifferent I would have thought, just make sure you copper-slip them?
3. where can i get the heat shield material for the engine bay? mine's pretty shagged.
- Any of the TVR shops online or Demon Tweeks, Ebay etc.
thanks!
1. Im thinking of using hex-head bolts when i put the manifolds back on, is this a good plan? or wont i be able to get enough torque on them without stripping the hex out.
Get a set of ARP studs from ACT - not hex head but they have smaller heads than normal and are easy to get to with a 3/8" spanner (you'll need to make sure you check the tightness a couple of times after fitting as they seem to come loose the first time you fit them..)
2. is it good / bad / indifferent to use stainless bolts for the manifold-to-head?
- Indifferent I would have thought, just make sure you copper-slip them?
3. where can i get the heat shield material for the engine bay? mine's pretty shagged.
- Any of the TVR shops online or Demon Tweeks, Ebay etc.
thanks!
Don't use hex head bolts, you will not be able to get the allen key socket in to tighten them, I used ARP bolts on mine, with Norlock washers.
available here. http://cgi.ebay.co.uk/ARP-bolts-Nord-lock-washers-...
available here. http://cgi.ebay.co.uk/ARP-bolts-Nord-lock-washers-...
MK INDY said:
Don't use hex head bolts, you will not be able to get the allen key socket in to tighten them, I used ARP bolts on mine, with Norlock washers.
available here. http://cgi.ebay.co.uk/ARP-bolts-Nord-lock-washers-...
I'm confused: those bolts are advertised as having hex heads.available here. http://cgi.ebay.co.uk/ARP-bolts-Nord-lock-washers-...
R
sorry just to confirm, i meant alen-head hex bolts, you know what i mean!
ah so stainless is OK then, was just concerned as some metals expand/contract more than others and didnt want to end up with a cracked bolt stuck in the head or something.
those bolts are indeed shiney! seems a little steep £ though.... might ask my local fastener distributor what they have like that.
ah so stainless is OK then, was just concerned as some metals expand/contract more than others and didnt want to end up with a cracked bolt stuck in the head or something.
those bolts are indeed shiney! seems a little steep £ though.... might ask my local fastener distributor what they have like that.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


