Brake Master cylinder.

[paulathome]

Ok Chaps,
Master cylinder requires replacement but search has not come up with anything.
TVR specialists want over a 100 quid so has anyone found a direct replacement? Who was your supplier and what was the donor car?
Thanks.
Paul.

[haircutmike]

Personally, I would pay the right money for a brake part.

It is a Ford item, which one, who knows.

I use Clever Trevor because they are knowladgable, friendly and deliver next day!

http://www.clever-trevor.net/search.html?search=as...

For other alternatives, try this;

http://www.parkersteve.dsl.pipex.com/chimaeraparts...

[constablergt]

Hi Paul this is what I have found out about it might be some use. Cheers Rick


Ford Fiesta XR2 or 1.6i Ghia - check the bore diameter as there were two types used. The one you need for the 4.2 Cerbera is the larger, which is 22mm
Number PMF238, PMH 247 (pt-no 1991 22.2mm)


Replacement Numbers, PMF238, PMF254, PMF257


Brake Master Cylinder PFS901705

[Pupp]

There's a plastic band around the body of mine with the following code: '6561 8 as/as 23 ae'

I have seen it claimed that decent factors can match from that info... if you succeed, post up the donor car(s)