Standard Chim 4.0 (Ford) brake pad p/n
Standard Chim 4.0 (Ford) brake pad p/n
Author
Discussion

dog man

Original Poster:

552 posts

233 months

Thursday 20th January 2011
quotequote all
Howdy

I have searched but can't seem to find the definative part number or model of Ford that I would quote to get a new set of pads from Euro Car Parts.

Would they be from the Sierra? if so what year?

Mines a '94 4.0 (solid rear discs)


Thanks in advance!

Simon says

19,463 posts

252 months

Thursday 20th January 2011
quotequote all
Any RWD ford circa 85>95 with disc brakes rear inc Sierra,Granada,Escort Cosworth if you get the one's with warning indicator wires don't worry just cut them off,vented or solid application all the same wink e.g http://cgi.ebay.co.uk/FORD-ESCORT-SIERRA-GRANADA-S...

Edited by Simon says on Thursday 20th January 19:39

dog man

Original Poster:

552 posts

233 months

Thursday 20th January 2011
quotequote all
Cool thanks. Does this apply to fronts too?

Kitchski

6,552 posts

262 months

Saturday 22nd January 2011
quotequote all
Fronts are standard Sierra vented (normal models, not V6's or anything) upto 1996 (ish) on 400's. Best best is measure the discs.....if they're 239mm in diameter they're normal Sierra gear.

dog man

Original Poster:

552 posts

233 months

Saturday 22nd January 2011
quotequote all
Cheers

They arrived this morning.

After a simple clutch fluid change turned into a £400 new clutch master cylinder just before Christmas I will enjoy fitting myself these £4.99 NOS Ford pads!

Kitchski

6,552 posts

262 months

Sunday 23rd January 2011
quotequote all
£400 clutch m/cyl???!?!?!?!?!?! This is surely a typo?

paulathome

686 posts

249 months

Sunday 23rd January 2011
quotequote all
Oh my god, was it gold Plated? Just replaced mine for 70 quid care of clever trevor
I did have to buy a brake pipe flaring tool as my cylinder turned out to
Be the earlier cylinder with different sized unions front and back.
Even then the tool was only 40 quid and 2 quid for pipe ends.
Just noticed what clever trevor are selling the earlier cylinder for now i
Understand.

Edited by paulathome on Sunday 23 January 10:49

dog man

Original Poster:

552 posts

233 months

Sunday 23rd January 2011
quotequote all
No they fitted other bit's, the Clutch master was the headline though.

dog man

Original Poster:

552 posts

233 months

Thursday 27th January 2011
quotequote all
Hey guys.

I ordered the wrong fronts...the rears are fine though. What I think I have are the pads for the bigger discs. They are these: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...

I'm going to see if the seller has the correct ones, does anyone want these? I can also return these so no worries either way.

900T-R

20,406 posts

288 months

Friday 28th January 2011
quotequote all
dog man said:
Hey guys.

I ordered the wrong fronts...the rears are fine though. What I think I have are the pads for the bigger discs. They are these: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...
Indeed those look like the 260 mm ones.

dog man

Original Poster:

552 posts

233 months

Friday 28th January 2011
quotequote all
Yeah I thought so. If anyone wants 'em let me know otherwise I'll give them to my neighbor if they'll go in his Mondeo.

dog man

Original Poster:

552 posts

233 months

Friday 28th January 2011
quotequote all
Gone to my Mondeo driving neighbor.