New windscreen wipers
Discussion
As they are only held on with one nut and you don't even need to open the bonnet it's got to be about the easiest job you could ask for
Pull the plastic cover off.
Undo nut
Pull off old wiper (it maybe quite stiff)
New wiper arm will probably not have the splines in it, don't worry about this it cuts it's own on the spindle when you tighten it down, so make sure you've got it at the right angle
tighten nut
Refit plastic cover
Go out it the rain and see if they fly off/hit the bonnet or wing or actually touch the screen anything more than an inch wide strip down the middle

Pull the plastic cover off.
Undo nut
Pull off old wiper (it maybe quite stiff)
New wiper arm will probably not have the splines in it, don't worry about this it cuts it's own on the spindle when you tighten it down, so make sure you've got it at the right angle
tighten nut
Refit plastic cover
Go out it the rain and see if they fly off/hit the bonnet or wing or actually touch the screen anything more than an inch wide strip down the middle

Gassing Station | Chimaera | Top of Page | What's New | My Stuff


