Discussion
Help
Getting my Chim out this morning to go to work and as I turned the steering wheel to get of the drive the horn kept on blowing!!
All ok in a straight line then at the fist T junction when the wheel was turned the horn went off.
Then at work in a big car park went to see if problem was still there put full left and right lock on and no horn!?
Thanks in advance
Getting my Chim out this morning to go to work and as I turned the steering wheel to get of the drive the horn kept on blowing!!
All ok in a straight line then at the fist T junction when the wheel was turned the horn went off.
Then at work in a big car park went to see if problem was still there put full left and right lock on and no horn!?
Thanks in advance
Sounds to me like you have a sticky horn ring, Matron! If you take off the steering column shroud the horn ring is at the top, looks like brass with two brass finger contacts, try giving it a clean with some spirit and give it a light rub with an abrasive wet n dry , scotchbrite etc. Usually works as the contacts are prone to getting dirty.
HTH
HTH
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


