Does a Jaguar S-Type 2000 3.0 V6 have a PVC valve?

[Gibbo205]

Hi there


I've got a vacuum leak and I've got a load of parts from Jaguar but I really can't work out what goes where.


XR8 45730 - ( 90 DEGREES ) ELBOW BREATHER HOSE


This one I've fitted no problem, it went in the V of the engine under the inlet manifold and fuel rail, my old one did have a hole in it. Since fitting this car is improved but not spot on.



MY PROBLEM PARTS

I also have:-
XR8 39224 - This goes on the plastic vacuum line which connects to the throttle body, problem is where do I connect the other end?



I also have parts:-
C2S51409 - which is a PCV valve and I can't find anywhere where this goes or would fit, does my car even have one of these?



C2S50039 - This is a part of rubber hose with different diameter size holes each end. I think this goes onto the metal/plastic pipe at the back of the engine which the 90degrees elbow is connected to in the V of the engine which I've already fitted.





My problem is XR8 39224 should I be forcing this into C2S50039 and just forgetting the PCV Valve (C2S51409) or does that PCV valve need to be fitted somewhere or do I require another part/adapter to make XR8 39224 and C2S50039 fit together.

If anyone has any pictures or knows where I am going wrong, it would be a great help.

Edited by Gibbo205 on Monday 28th November 16:08

Edited by Gibbo205 on Monday 28th November 16:09