X308 Valet mode & boot access problems
Discussion
All, I wonder if you could proffer a bit of assistance to a mate of mine who's just bought a 98 S X308 3.2.
He's got two problems, both of which are potentially related:
1) The car is in valet mode but due to the key fob not working (or not having lost it's programming), he can't get it out of valet mode.
2) He now can't get in the boot due the above (even using the key).
I'm lead to believe that valet mode can be 'reset' by disconnecting and reconnecting the battery, which would of course be great, if he had access to the boot.
Any assistance or pointers in the right direction would be greatly appreciated.
Cheers.
He's got two problems, both of which are potentially related:
1) The car is in valet mode but due to the key fob not working (or not having lost it's programming), he can't get it out of valet mode.
2) He now can't get in the boot due the above (even using the key).
I'm lead to believe that valet mode can be 'reset' by disconnecting and reconnecting the battery, which would of course be great, if he had access to the boot.
Any assistance or pointers in the right direction would be greatly appreciated.
Cheers.
Tha manual locks on the boot lid are prone to siezing as nobody uses them. Spray some WD 40 into the key hole and gently turn the key clockwise and anti clockwise - you should feel the lock mechanism "catch" once the WD gets to work and you'll be able to unlock the boot. A few gentle thumps around the lock apeture may help too.
If you've lost the transmitter programming then fit new batteries into (up to 5) fobs and do this;
Hold headlight flasher back.
Turn ignition key to position 1
Flash headlights 4 times
Alarm will now enter programming mode - it will beep and the security led on the J gate surround will flash
Programme each transmitter by pressing the lock or unlock button on the transmitter once
Tha alarm will sound when you press the button.
However...The alarm must sound 5 times to complete the programming, therefore if you only have one transmitter, press the lock or unlock button 5 times, two transmitters have to have buttons pressed twice on one and three times on the other, 3 transmitters....oh go on you guess.
HTH
If you've lost the transmitter programming then fit new batteries into (up to 5) fobs and do this;
Hold headlight flasher back.
Turn ignition key to position 1
Flash headlights 4 times
Alarm will now enter programming mode - it will beep and the security led on the J gate surround will flash
Programme each transmitter by pressing the lock or unlock button on the transmitter once
Tha alarm will sound when you press the button.
However...The alarm must sound 5 times to complete the programming, therefore if you only have one transmitter, press the lock or unlock button 5 times, two transmitters have to have buttons pressed twice on one and three times on the other, 3 transmitters....oh go on you guess.
HTH
Edited by Jaguar steve on Saturday 30th May 16:19
Gassing Station | Jaguar | Top of Page | What's New | My Stuff


