XKR steering rack tie bar
XKR steering rack tie bar
Author
Discussion

SFMXKR

Original Poster:

525 posts

214 months

Saturday 17th October 2009
quotequote all
Hi all
Has anyone any experience of changing out the tie bar element of the steering rack and if so where did you purchase the part?

Many thanks in advance for those who respond...

Lost soul

8,712 posts

211 months

Saturday 17th October 2009
quotequote all
scratchchin


















i guess you could try Jaguar biggrin

SFMXKR

Original Poster:

525 posts

214 months

Saturday 17th October 2009
quotequote all
God, how silly I never thought of asking Jaguar for a Jagaur part, that's a masterstroke, a real bit of blue sky, out of the box thinking. You'll go far......

banghead


Tame Technician

2,467 posts

233 months

Tuesday 20th October 2009
quotequote all
Whats a tie bar.

Is that the same as a track rod???

SFMXKR

Original Poster:

525 posts

214 months

Wednesday 21st October 2009
quotequote all
No bud, it's the bit that connects the track rod end and the steering rack. In some cases it is possible to change out this element of the rack instead of the whole thing. Not sure if this is the case with Jaguar.
Picked up a small amount of play on the drivers side and am loath to change out the whole rack for such a minor issue...


DTYPE

72 posts

249 months

Wednesday 21st October 2009
quotequote all
Hi there,

The part you are asking about cannot be bought from Jaguar only a complete rack, we have purchased them from here before: www.autosuppliers.co.uk/contact.html you will need the 8 digit (IIRC) number from the rack not the Jaguar part number for them to work out which one you need and the cost, around £40.00 last time we had one.

However if you have detected the play at the wheel and can see what looks like the inner tie bar joint moving? Before you go and order one drop the gaiter down to expose the inner balljoint and have someone rock the wheel to create the movement while checking the joint, 95% of the time the play will be visible in the rack shaft itself not the joint, people above will put you in contact with a good rack refurbisher this will cost around £280 dependent on model and parts required during refurb. Of course we can arrange this if you are near to Derby.

Regards

Dan
EAPJ limited

SFMXKR

Original Poster:

525 posts

214 months

Thursday 22nd October 2009
quotequote all
DTYPE said:
Hi there,

The part you are asking about cannot be bought from Jaguar only a complete rack, we have purchased them from here before: www.autosuppliers.co.uk/contact.html you will need the 8 digit (IIRC) number from the rack not the Jaguar part number for them to work out which one you need and the cost, around £40.00 last time we had one.

However if you have detected the play at the wheel and can see what looks like the inner tie bar joint moving? Before you go and order one drop the gaiter down to expose the inner balljoint and have someone rock the wheel to create the movement while checking the joint, 95% of the time the play will be visible in the rack shaft itself not the joint, people above will put you in contact with a good rack refurbisher this will cost around £280 dependent on model and parts required during refurb. Of course we can arrange this if you are near to Derby.

Regards

Dan
EAPJ limited
Many thanks for your response Dan. I have had all the gaiters back and inspected the joints. I have just changed out all ball joints, track rod ends and bushes etc (things were getting tired) and done the brakes (Bloody Brembos, it's the XKR400) all round and am really getting picky now. Thanks for the web addy.
Stewart
wink