A6 Engine Help Required - Please
A6 Engine Help Required - Please
Author
Discussion

dozer996

Original Poster:

85 posts

263 months

Wednesday 2nd October 2013
quotequote all
I have a 3.0tdi diesel 2007 with 170k miles. Thanks to this forum I have addressed the manifold issue (Audi replacement kit) but the one problem I have is the slight fluctuation of revs. Its not rough idling but more like a valve opening and closing and most noticeable when idling although I notice it at constant speeds - say motorway driving. The codes read are:
P1018: Lower limit not reached
P1580:Throttle control valve
P106B: Unknown
P3135: Variable intake manifold, switch over valve, lower stop not reached.
If I look at the engine when its idling I can see a valve on the exhaust gas recycling unit (?) is oscillating and the arm that controls the pitch of the turbo vanes is also moving!!
The codes were read before I changed the arms on the manifold flaps which I have just bought from Audi. Any help appreciated please!

Maracus

4,553 posts

199 months

Wednesday 2nd October 2013
quotequote all
I can't help specifically, but I see you're in Northants and I can recommend APS in Brackley to have a look.

dozer996

Original Poster:

85 posts

263 months

Thursday 3rd October 2013
quotequote all
Thanks Maracus. Hopefully TameTechnician will be along shortly and give some clues!!

dozer996

Original Poster:

85 posts

263 months

Monday 14th October 2013
quotequote all
Can anyone help, please😩😩??!

Tame Technician

2,467 posts

235 months

Tuesday 15th October 2013
quotequote all
dozer996 said:
P1580:Throttle control valve
P106B: Unknown
This is ref the throttle valve, or smooth shut off valve.

You can take the boost pipe off and look at it, have an assistance start and stop the engine, you should see it open and then quickly shut when the ign is switched off. If its all over the place and doesnt shut needs a new one.

http://www.youtube.com/watch?v=DkKMQxkMeCQ

dozer996

Original Poster:

85 posts

263 months

Tuesday 15th October 2013
quotequote all
Thanks TT. Can the body be cleaned or is it a replacement job?