AUDI TTS MK2 remap question
AUDI TTS MK2 remap question
Author
Discussion

MagnumPI

Original Poster:

825 posts

173 months

Wednesday 23rd October 2013
quotequote all
I am looking to get my wifes Audi TTS remapped and have been quoted the following prices

RevoTechnik stage 1 ECU remap is £598

or

DNA Stage 1 ECU remap is £225

I would love to hear feedback from those who have remapped their TTS and the difference it has made to their car, and also if anyone knows the actual difference between the 2 different options above, and which is better (obviously the RevoTechnik one should be due to the cost)

many thanks

Dr G

16,017 posts

273 months

Wednesday 23rd October 2013
quotequote all
Better? Hard to say. I've never heard of the second option you mention.

Revo don't try to be the cheapest but are careful with what they market and offer decent product support.

Cheesy but you can normally pick any two of the following when it comes to tuning:

Cheap
Powerful
Reliable

If something is suspiciously cheap there's normally a reason for it.

MagnumPI

Original Poster:

825 posts

173 months

Wednesday 23rd October 2013
quotequote all
Dr G said:
Better? Hard to say. I've never heard of the second option you mention.

Revo don't try to be the cheapest but are careful with what they market and offer decent product support.

Cheesy but you can normally pick any two of the following when it comes to tuning:

Cheap
Powerful
Reliable

If something is suspiciously cheap there's normally a reason for it.
Thanks for the reply. Cheap is the least one I am looking for with powerful and reliable being the two most important to me.

They have quoted me approx 30bhp increase with the revo (which would take it to 298bhp) but I have seen previous posts (which I cannot find now) which claim to have taken theirs to 310bhp+ and was very keen in talking to those who have actually had it done, and what they have experienced.

Gio G

2,995 posts

240 months

Wednesday 23rd October 2013
quotequote all
I don't think you will be disappointed with DNA tuning. The owner (John) runs his own race car which is based upon a 2.0 TFSI and very knowledgeable.. I believe he actually writes the maps for other big tuning companies.

PM me if you want more details.

chris285

812 posts

163 months

Wednesday 23rd October 2013
quotequote all
If its a TFSI engine i'd suggest having a word with Niki at R-Tech, cannot fault him for results and customer service but location may not suite

never heard of DNA myself so can't comment, Revo are decent enough or there is APR as well

paulmc

246 posts

237 months

Wednesday 23rd October 2013
quotequote all
John @ dna is my fie supplier and has been for years. You won't find better. He spends all his time writing files and not actively remapping cars although he will be happy to remap any car he just moved to bigger premises to cope with demand. He writes all the files for the Mini Cooper race series an loads of guys in the seat cup he races in.

chris285

812 posts

163 months

Wednesday 23rd October 2013
quotequote all
This is why i would suggest R-Tech personally, custom mapping done on the car while on the Dyno to get the best results out of that specific car and setup

I'm not saying DNA stuff is not any good, but a map which is flashed can only go so far in comparison

paulmc

246 posts

237 months

Wednesday 23rd October 2013
quotequote all
Every map is a flash. Not sure what you are on about??

If your on about custom mapping that is just, upload (flash) generic map, run it and do some logs, adjust the map accordingly then upload I again to the ecu to get te max out of the car. Might need to be done several ties to get t right.

Even then on the rollers is ok, on the road is the proper way to do it. Real load and real temps. Just not that safe.

cerb4.5lee

45,371 posts

211 months

Wednesday 23rd October 2013
quotequote all
I will be interested in your thoughts when you get it done as we keep thinking about remapping ours as its meant to reduce the lag aswell from what I've read so its sounds like a win win, more power/torque & reduced lag it sounds like a great benefit.

chris285

812 posts

163 months

Thursday 24th October 2013
quotequote all
paulmc said:
Every map is a flash. Not sure what you are on about??

If your on about custom mapping that is just, upload (flash) generic map, run it and do some logs, adjust the map accordingly then upload I again to the ecu to get te max out of the car. Might need to be done several ties to get t right.

Even then on the rollers is ok, on the road is the proper way to do it. Real load and real temps. Just not that safe.
The way I read the DNA stuff is that is a generic map which is uploaded, as you say custom mapping takes into account the hardware of the car including any changes which cannot be accounted for in a map which is loaded

MagnumPI

Original Poster:

825 posts

173 months

Thursday 24th October 2013
quotequote all
Thanks for all your replies. We have slightly changed our mind since yesterday and the car is being booked in for a stage 2 conversion compromising of

Scorpion stainless exhaust system with sports cat, Forge performance intake system, Revo stage 2 Ecu remap smile

I will report back once it has all been completed with my opinion. Looking forward to seeing the difference it makes !

richwig83

15,857 posts

169 months

Thursday 24th October 2013
quotequote all
REVO will be fine. (ive got revo on my edition30)

Have you looked into R-TECH? Nik is probably the best person to see to get a custom map setup how you want it. And at about 300quid... he's cheaper than REVO

Gio G

2,995 posts

240 months

Thursday 24th October 2013
quotequote all
MagnumPI said:
Thanks for all your replies. We have slightly changed our mind since yesterday and the car is being booked in for a stage 2 conversion compromising of

Scorpion stainless exhaust system with sports cat, Forge performance intake system, Revo stage 2 Ecu remap smile

I will report back once it has all been completed with my opinion. Looking forward to seeing the difference it makes !
You will probably need bigger brakes after that lot wink

paulmc

246 posts

237 months

Thursday 24th October 2013
quotequote all
chris285 said:
The way I read the DNA stuff is that is a generic map which is uploaded, as you say custom mapping takes into account the hardware of the car including any changes which cannot be accounted for in a map which is loaded
Any good tuner can do custom mapping including DNA. My 535d made over 380bhp, no cat or dpf, full stainless exhaust, rs500 intercooler and several maps to get best out of the car. All done by DNA

Niffty951

2,401 posts

259 months

Friday 25th October 2013
quotequote all
I personally have a few issues with the Revo remap. Nothing serious, the car didn't have any reliability issues so I'm not implying it's damaging but I have owned and driven many remapped cars previously and had heard good things about Revo software but never tried it.

Having finally owned a k03 2.0 TFSI with a stage 2 Revo remap and Miltek downpipe/sports cat fitted I wasn't impressed. The car was an immaculate example with a still nicely fresh turbo and no pressure leaks but had an intermittent rough idle that was worst when pulling to a stop after recently being on boost.

In addition the car had an extremely front loaded throttle pedal and excessive hike in boost between 2000-3500rpm. This made it very difficult to accurately modulate the throttle between off/on boost over this rev band.

This made smooth progress difficult and full throttle, higher rpm driving feel unsatisfying. Revving the car right through the range it felt hideously 'under turbo'd' with the k03. It felt out of puff by 4500rpm.

When the car was accidentally put back to standard by Audi while retrofitting cruise control I noticed not only was the car a lot nicer to drive hard. With a strong, smooth power band and a longer throw on the throttle pedal but the car idled perfectly at all times.

The only trouble was it no longer had any go in the tall gears. I missed the boost.

The best re-map I've ever experienced by a long way was the MTM software on my 2.7t RS4. That was as good as the factory map.. just a lot more of it smile

Dr G

16,017 posts

273 months

Friday 25th October 2013
quotequote all
I've mentioned a few times re. K03 cars that there's little point trying to extract loads from them as you end up with the undesirable characteristics described above. The 'stage 1' map is a lot of fun but for me the sensible limit of the turbo.

The idle issue confuses me though, not seen that before.

richwig83

15,857 posts

169 months

Friday 25th October 2013
quotequote all
Chances are that the sensitive throttle issue was down to the OEM throttle position map. It's very aggressive and is made worse when you map the ECU! You really need a linear throttle setup, which any tuner worth their salt can do.

Dr G

16,017 posts

273 months

Friday 25th October 2013
quotequote all
Revo agents do have the ability to customise the software in this way; some people like it to be as old school and aggressive as possible.

richwig83

15,857 posts

169 months

Friday 25th October 2013
quotequote all
Yes they do. I've got their linear file on mine and it's much more drivable.

Niffty951

2,401 posts

259 months

Friday 25th October 2013
quotequote all
As some knowledgeable types have descended here perhaps you could answer me one question.

Is the mechanical fuel pump on the tts/s3 engine any different from the 200hp model? Also why are there 6 different Audi part numbers for the s3? Surely same block moulding? ...should all fit?