Upgrading cams to Piper Fast Road cams in mk2 golf gti
Upgrading cams to Piper Fast Road cams in mk2 golf gti
Author
Discussion

DubNut1664

Original Poster:

74 posts

159 months

Saturday 9th November 2013
quotequote all
Hi all, I'm contemplating upgrading the cams and just wondering what your thoughts were or if anyone here has experience of it.

My Golf is a 1991 mk2 8v GTi with 116,500 miles on the clock and pushes out 108bhp (out of the original 112bhp). The engine runs great and the car drives really well, however I have it in my head that I want more power and I don't want to shell out for an engine swap to an ABF or 1.8t etc, I just want to make the most of what I have got.

If I go ahead with the upgrade will I need to upgrade any other parts first? I wasn't sure if it was best to upgrade the exhaust and manifold beforehand (and in which case what exhaust?). Also would a remap be vital for the cams to work properly?

Any advice would be very much appreciated.

Thanks

Matt

Msportman

313 posts

187 months

Sunday 10th November 2013
quotequote all
Speak to TSR Performance 01278 453036 ....they know their MK2'2s.

They run better with the head and bigger valves to compliment the cam....deoends on cam spec duration and lift.

Kjet is easier to set up....or you can use stand alone custom ECU set up.

Dr G

16,017 posts

273 months

Monday 11th November 2013
quotequote all
Msportman's advice is spot on, mild cam would improve performance but to get the maximum benefit from it you'll need other new parts as well.

For the price of a good head, cam, exhaust etc. you could nearly get an ABF in there or even a 2.0 bottom end from a MK3 (which is worth virtually nothing used so a very cheap upgrade).

DubNut1664

Original Poster:

74 posts

159 months

Friday 6th December 2013
quotequote all
cheers for the advice.

Getting the head polished and ported now, after that I will upgrade exhaust and manifold and maybe add a cam later. :-)

blade7

11,311 posts

247 months

Saturday 7th December 2013
quotequote all
Shame you're not a bit nearer, I have a gas flowed 8v head in the garage from my mk2 Golf days 20 years ago.

Mojocvh

16,837 posts

293 months

Saturday 7th December 2013
quotequote all
DubNut1664 said:
cheers for the advice.

Getting the head polished and ported now, after that I will upgrade exhaust and manifold and maybe add a cam later. :-)
Let us know how you get on thumbup

DubNut1664

Original Poster:

74 posts

159 months

Sunday 8th December 2013
quotequote all
Mojocvh said:
Let us know how you get on thumbup
Will do! Not likely to get the cylinder head back from the workshop until the new year as it's so close to Xmas now.