vag com reader?
Discussion
Hi everyone,
I bought an 07 Seat Leon Cupra 8 days ago from an authorised Seat dealer and it was an approved used car with a 1 year warranty.
Yesterday, the emissions light came on the dash so I thought no problem, I'll book it into an official Seat garage. I appreciate warranties have lots of exclusions but I am somewhat confused...
To have the fault diagnosed, the dealership run a diagnostic for £72 including VAT. If the fault that is something that can be repaired under warranty, then they pay for this diagnostic + replacement of whatever needs doing.
If it is not a warranty problem, I have to pay the £72 + whatever other costs (which I would get done at an independent dealer as main dealer prices are usually ridiculously high).
So, bit of a sticky situation... Sadly no crystal ball as if it is a non-warranty issue, I would get the diagnostic done elsewhere for far less than £72.
ANYWAY, I am also contemplating getting a vag com reader to prevent this issue happening in the future as I can scan the car myself thus bypassing the uncertainty of whether whatever issue is covered under warranty.
So 3 questions...
1. (cheeky) does anyone have a full vag com reader available today/tomorrow within 10 miles of LE1 (leicester) in exchange for beer tokens?
2. I read this thread: http://www.pistonheads.com/gassing/topic.asp?t=126...
and it mentioned that any £7-70 readers are a false economy and the only one really worth going for is from Gendan (currently £263). Anyone know of anywhere else that does the full system but for a little cheaper perhaps?
Thanks in advance
I bought an 07 Seat Leon Cupra 8 days ago from an authorised Seat dealer and it was an approved used car with a 1 year warranty.
Yesterday, the emissions light came on the dash so I thought no problem, I'll book it into an official Seat garage. I appreciate warranties have lots of exclusions but I am somewhat confused...
To have the fault diagnosed, the dealership run a diagnostic for £72 including VAT. If the fault that is something that can be repaired under warranty, then they pay for this diagnostic + replacement of whatever needs doing.
If it is not a warranty problem, I have to pay the £72 + whatever other costs (which I would get done at an independent dealer as main dealer prices are usually ridiculously high).
So, bit of a sticky situation... Sadly no crystal ball as if it is a non-warranty issue, I would get the diagnostic done elsewhere for far less than £72.
ANYWAY, I am also contemplating getting a vag com reader to prevent this issue happening in the future as I can scan the car myself thus bypassing the uncertainty of whether whatever issue is covered under warranty.
So 3 questions...
1. (cheeky) does anyone have a full vag com reader available today/tomorrow within 10 miles of LE1 (leicester) in exchange for beer tokens?
2. I read this thread: http://www.pistonheads.com/gassing/topic.asp?t=126...
and it mentioned that any £7-70 readers are a false economy and the only one really worth going for is from Gendan (currently £263). Anyone know of anywhere else that does the full system but for a little cheaper perhaps?
- *3. Assuming I get a vag com reader, do dealers care if you diagnose your own car and tell them the faults or will they just insist on running their own diagnostic?***
Thanks in advance

You don't necessarily need VAG-COM just to pull the fault codes, only for more in depth measuring and examination of certain values and live data.
I have used a generic fault code reader in the past to diagnose stuff on my Audi A3. I also have a bluetooth OBD2 dongle that connects to my android phone that does the same thing. Either of these will give you a starting point.
However, a dealer may use your information as somewhere to start, I would expect they will still insist on running their own diagnostics anyway.
HTH
Smithy
I have used a generic fault code reader in the past to diagnose stuff on my Audi A3. I also have a bluetooth OBD2 dongle that connects to my android phone that does the same thing. Either of these will give you a starting point.
However, a dealer may use your information as somewhere to start, I would expect they will still insist on running their own diagnostics anyway.
HTH
Smithy
Thanks for your reply Smithy.
So to build on what you've said, would it be correct to say that for simply reading fault codes, a simple cheap reader will do the trick?
I don't require the ability to change any settings on the car as can be done with a full vag-com/vcds such as door locking preferences, light preferences etc.
However, if someone confirmed that the ONLY type of reader that will read 100% of all FAULT codes is an official vag-com/vcds system (eg gendan, £260), then this is the only type i will consider.
I should also note that I am no longer looking to use a reader as 2 people on another forum have offered me theirs.
Thanks.
So to build on what you've said, would it be correct to say that for simply reading fault codes, a simple cheap reader will do the trick?
I don't require the ability to change any settings on the car as can be done with a full vag-com/vcds such as door locking preferences, light preferences etc.
However, if someone confirmed that the ONLY type of reader that will read 100% of all FAULT codes is an official vag-com/vcds system (eg gendan, £260), then this is the only type i will consider.
I should also note that I am no longer looking to use a reader as 2 people on another forum have offered me theirs.
Thanks.
I was just about to post this topic myself 
I have just bought year 2001 Seat Ibiza Cupra with the 1.8T VAG motor in it for track days and I really want a VAG COM reader so I can check for faults and other issues while I test/modify the car.
I would prefer the ones that show the live engine data such as misfire counting, Lambda reading etc but I don't want to spend too much money, and I'm totally confused as some say they will reset engine fault codes and service lights while seemingly similar readers say they won't!
But I have no idea if I need OBD or OBDII or EOBD (which I think is the new standard?).
People keep telling me that stuff like the below will be ok, but I have no idea...
can anyone help?
http://www.ebay.co.uk/itm/Diagnostic-Scanner-Check...
http://www.ebay.co.uk/itm/DIAGNOSTIC-CODE-READER-S...
Thanks!

I have just bought year 2001 Seat Ibiza Cupra with the 1.8T VAG motor in it for track days and I really want a VAG COM reader so I can check for faults and other issues while I test/modify the car.
I would prefer the ones that show the live engine data such as misfire counting, Lambda reading etc but I don't want to spend too much money, and I'm totally confused as some say they will reset engine fault codes and service lights while seemingly similar readers say they won't!
But I have no idea if I need OBD or OBDII or EOBD (which I think is the new standard?).
People keep telling me that stuff like the below will be ok, but I have no idea...
can anyone help?
http://www.ebay.co.uk/itm/Diagnostic-Scanner-Check...
http://www.ebay.co.uk/itm/DIAGNOSTIC-CODE-READER-S...
Thanks!
To try and shed some light on this issue, perhaps I can explain the following (as I understand it).
Since 2001 manufacturers have been legally obliged to allow access to emissions effecting data through a standard OBD port (diagnostic port) and using 1 of 5 standard languages. The OBD data drives the engine management light, and thus this data will allow you to see the engine management light causes.
However, manufacturers are not obliged to provide more than emissions data to aftermarket sources. There are some clever people out there that try and make machines that will read this data, either with or without the good will of the makers. The data in question allows access to many more fault codes and coding / adaption programs through the standard OBD port.
So, if you had a post 2001 petrol engine car, you will be allowed access to the emissions data through a product like that highlighted.
This is unlikely (hugely unlikely) to access the manufacturers data otherwise locked into the ECU. You will need VAG COM, or a similar program to access this. Then of course you need to understand what it means (or indeed understand how to use VCDS as Vag com is now called.
Unless you are experienced or have been trained, I would suggest it unlikely that the connection to the OBD emissions data will make much sense to you (not intending to offend here). I think asking on here for someone to read the codes may provide a good start, but I think you are going to be stung for the £72 + VAT from the main dealer. That by the way is an outrageous price.
Hope this is helpful.
Since 2001 manufacturers have been legally obliged to allow access to emissions effecting data through a standard OBD port (diagnostic port) and using 1 of 5 standard languages. The OBD data drives the engine management light, and thus this data will allow you to see the engine management light causes.
However, manufacturers are not obliged to provide more than emissions data to aftermarket sources. There are some clever people out there that try and make machines that will read this data, either with or without the good will of the makers. The data in question allows access to many more fault codes and coding / adaption programs through the standard OBD port.
So, if you had a post 2001 petrol engine car, you will be allowed access to the emissions data through a product like that highlighted.
This is unlikely (hugely unlikely) to access the manufacturers data otherwise locked into the ECU. You will need VAG COM, or a similar program to access this. Then of course you need to understand what it means (or indeed understand how to use VCDS as Vag com is now called.
Unless you are experienced or have been trained, I would suggest it unlikely that the connection to the OBD emissions data will make much sense to you (not intending to offend here). I think asking on here for someone to read the codes may provide a good start, but I think you are going to be stung for the £72 + VAT from the main dealer. That by the way is an outrageous price.
Hope this is helpful.
My cheapo ebay cable and vcds lite (free) is good enough for diagnosing basic faults. I just repaired a knackered ignition coil and reset the engine management light on an 07 TT. It only gives maximum of 2 fault codes out the ECU but it was enough information when coupled with googling the fault codes to figure out I had a misfire on cyclinder 1.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


