CV joint noises.
Author
Discussion

gforceg

Original Poster:

3,525 posts

210 months

Friday 6th December 2013
quotequote all
Hi, my NSF CV joint has recently started making the distinct clicking noise on full lock and looks like needing to be replaced.

My question is, does that noise indicate specifically that the OUTER CV joint if failing or can that noise come from the inner joint too?

Also, putting aside the obvious, how long can I go before replacing it? It's a bit too late to do it this weekend and I'm occupied next weekend. Without major abuse will it go on for a while or might it collapse on me at any moment?

Thanks for any help.


gforceg

Original Poster:

3,525 posts

210 months

Saturday 7th December 2013
quotequote all
Anyone on the day shift who can offer an opinion?

Cheers

BlackShadow888

21 posts

166 months

Saturday 7th December 2013
quotequote all
Hi,

In most cases of failed CV joints I have seen, it is the outer joint that makes nasty noises due to it being the joint that's taking the stress of steering motion when under lock. The inner joints just "spin" accordingly and often aren't at fault. However don't rule it out.

As far as how long till the big failure...who knows. Depends if it's been subject to the ingress of dirt etc, and if so how long.

Get it looked at. It will need doing at some point!

gforceg

Original Poster:

3,525 posts

210 months

Sunday 8th December 2013
quotequote all
Thanks for that! I've now gone ahead and bought a replacement outer joint kit because I really don't fancy letting it go on much longer. Guess what I'll be doing on my next day off?

Cheers

BlackShadow888

21 posts

166 months

Sunday 8th December 2013
quotequote all
Haha, better safe than sorry - and without driven wheels in the middle of the night!