Common pas pump issue on 1.8t?!
Common pas pump issue on 1.8t?!
Author
Discussion

skypeller

Original Poster:

151 posts

224 months

Wednesday 18th December 2013
quotequote all
Please take a look at the pictures i have of kyb pas pump from a 1.8turbo golf gti mk4
Can anybody tell me if they have heard if this is a common failure as my car is making a strange rattling noise on take off or sometimes moving slowly under load, with the aux belt removed its as quiet as a mouse!
No play in alternator, no play in the tensioner, play back and forth is present in the pas pump so i ordered a spare second hand as i didnt intend keeping the car long, but i went to fit the 2nd hand pump and notice this .... (Compare top pic of good unit to bottom pic where there pump shaft seems to have blown a hole through the end plate which is cast) this then is allowing play like in the pump thats currently on my car!
Doesnt seem to leak and pumps fine, just sounds awful when cold!

Cambelt and waterpump/tensioner were all changed a month ago by a decent garage

My car is a 03 gti 180bhp 108k miles


skypeller

Original Poster:

151 posts

224 months

Wednesday 18th December 2013
quotequote all

shtu

4,617 posts

177 months

Wednesday 18th December 2013
quotequote all
That's a VERY clean and new-looking break, the casting isn't even dirty.

Looks to me like it's been damaged in transit.

Maracus

4,553 posts

199 months

Wednesday 18th December 2013
quotequote all
I've owned 2 x 1.8T Golfs, a 1.8T 180 Toledo and an S3 1.8T 210.

Never had an issue with any PAS pump in 1000s of miles of ownership of these.

skypeller

Original Poster:

151 posts

224 months

Wednesday 18th December 2013
quotequote all
It could well be damaged in transit! Just seems strange that the on my vehicle has the same amount of play and the only this is possible is by having that same part damaged

skypeller

Original Poster:

151 posts

224 months

Wednesday 8th January 2014
quotequote all
In case anybody ever needs help in future the problem turned out to be the old "terrible mechanic" who changed my Cambelt
He broke one of the cap head bolts off in the crankshaft pulley which the aux crank pulley bolts too which resulted in my 23rd December being spent with me drilling and tapping the broken stud to m8 and fitting 4 of new m8 x20 bolts

Useless garage who were meant to have rechecked their work ......they changed the Cambelt tensioner and water pump and the car rattled on take off ever since.....as above I sorted the issue...the crank pulley was loose and rattling on its mounting bolts

Fixed......