2004 S4 - wobble bolts?
Discussion
A question born of idle curiosity.
The other day, to combat the idiocy of the last person to do anything with the wheels on our new S4, I spent a while removing, copperslipping, and replacing all the wheel bolts. (And nearly ending myself in the process, damn they were on tight!)
I've not used wobble bolts myself, but all the wheel bolts (except the lockers) had a captive but attached angled washer next to the head. Am I right that this is a wobble bolt?
And is it normal for the S4 to be fitted with wobble bolts? I thought they were usually used to allow slightly different fitments, but these are the manufacturer fit alloys.
The other day, to combat the idiocy of the last person to do anything with the wheels on our new S4, I spent a while removing, copperslipping, and replacing all the wheel bolts. (And nearly ending myself in the process, damn they were on tight!)
I've not used wobble bolts myself, but all the wheel bolts (except the lockers) had a captive but attached angled washer next to the head. Am I right that this is a wobble bolt?
And is it normal for the S4 to be fitted with wobble bolts? I thought they were usually used to allow slightly different fitments, but these are the manufacturer fit alloys.
My 2010 S4 has standard bolts, all alloy wheel bolts have a washer that rotates to avoid damaging the wheel when tightening the bolts up.
Also feel your pain the hubs and bolts not being copper slipped, found this out when fitting the winter wheels. Always keep a tin in the garage with an brush old stuck in...
Also feel your pain the hubs and bolts not being copper slipped, found this out when fitting the winter wheels. Always keep a tin in the garage with an brush old stuck in...
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


