Audi A6 C6 Bulb Replacement Dipped Beam H7
Discussion
Does anyone have some useful tips/guide for replacing A6 headlight dipped beam H7 bulbs? Space looks to be a premium with airbox & gubbins on o/s & power steering on n/s - may as well replace both bulbs.
Perhaps this is a dealer fit job - don't want to start to find its not a DIY. Why is it the industry seems to go backwards in some respects - how difficult can it be to design acces to consumable parts?
Perhaps this is a dealer fit job - don't want to start to find its not a DIY. Why is it the industry seems to go backwards in some respects - how difficult can it be to design acces to consumable parts?
Kell said:
I asked the q a few weeks back - I'll try and find the thread.
In the meantime, I was quite happy to have a go myself, but the new Halfords bulb fit for £6.99 was too good to pass up.
If they changed it for £6.99 then has to be the way to go. Audi quoted £150 labour plus £150 for the Xenon plus VAT In the meantime, I was quite happy to have a go myself, but the new Halfords bulb fit for £6.99 was too good to pass up.

I changed it myself in one hour, but could do it in 30 mins if I needed to again.
Dealer did left and right dipped headlight bulbs on my A6 (C6) for £45 and that included wash and vac of the car.
I tried myself on the passenger sde, dropped two torx bits to an irrectrievable place on the undertray, moved the power steering reservoir, but was still working by feel in a very small hole. gave up after 30 mins. Drivers side, I watched a guide on you tube and just didnt bother, you have to remove airbox (not that easy), MAF, airbox ducting, a few other bits and pieces too.
Did the H7 drivers side bulb on the wifes Outback (same size engine etc) access was easy, it took 5 mins from unlockingthe car to re-locking it after.
I think this is a major design error by Audi
I tried myself on the passenger sde, dropped two torx bits to an irrectrievable place on the undertray, moved the power steering reservoir, but was still working by feel in a very small hole. gave up after 30 mins. Drivers side, I watched a guide on you tube and just didnt bother, you have to remove airbox (not that easy), MAF, airbox ducting, a few other bits and pieces too.
Did the H7 drivers side bulb on the wifes Outback (same size engine etc) access was easy, it took 5 mins from unlockingthe car to re-locking it after.
I think this is a major design error by Audi
Well i changed them this weekend and it was no big deal - took about 45 mins per side but if doing again prob 15 mins tops.
Annoyingly the headlight clips are useless as they seem to get brittle with engine heat & not designed for regular removal - took the oportunity to do a few more jobs but overall straightfwd if a tad fiddly.
Nearside was more by feel but possible by loosening PS bottle & pushing downwards being the only way. Poor design by Audi for a consumable part!
Annoyingly the headlight clips are useless as they seem to get brittle with engine heat & not designed for regular removal - took the oportunity to do a few more jobs but overall straightfwd if a tad fiddly.
Nearside was more by feel but possible by loosening PS bottle & pushing downwards being the only way. Poor design by Audi for a consumable part!
Andy JB said:
Well i changed them this weekend and it was no big deal - took about 45 mins per side but if doing again prob 15 mins tops.
Annoyingly the headlight clips are useless as they seem to get brittle with engine heat & not designed for regular removal - took the oportunity to do a few more jobs but overall straightfwd if a tad fiddly.
Nearside was more by feel but possible by loosening PS bottle & pushing downwards being the only way. Poor design by Audi for a consumable part!
Agreed about the headlight clips, painful Annoyingly the headlight clips are useless as they seem to get brittle with engine heat & not designed for regular removal - took the oportunity to do a few more jobs but overall straightfwd if a tad fiddly.
Nearside was more by feel but possible by loosening PS bottle & pushing downwards being the only way. Poor design by Audi for a consumable part!

Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff



