Part falling off but what does it do
Part falling off but what does it do
Author
Discussion

macp

Original Poster:

4,823 posts

214 months

Sunday 2nd March 2014
quotequote all
The fan in my 16v polo was making a hell of noise when cutting in so I looked under the bonnet and noticed this shield was loose and resting against the fan blade. So this was the reason for all the noise but can anybody tell me what it does and do I need it ?


cptsideways

13,904 posts

283 months

Sunday 2nd March 2014
quotequote all
Its the exhaust heat shield, there are some 10mm very rusty bolts holding it on. I'd try & replace these bolts. See if they will budge (ideally when very hot) perhaps a light tap with a hammer might helps dislodge the rusty threads first.

Just replace the bolts & jobs a gooden, worst case the bolts will seize & break the bolts in which case ditching the heatshield wont do too much harm.

macp

Original Poster:

4,823 posts

214 months

Sunday 2nd March 2014
quotequote all
Many thanks but just wondering that pipe going back to the airbox looks as if it feeds the hot air back to the airbox but why ?

Sticks.

9,726 posts

282 months

Sunday 2nd March 2014
quotequote all
I suspect it's to add warm air to the induction, which will speed warming-up and help fuel efficiency.

macp

Original Poster:

4,823 posts

214 months

Sunday 2nd March 2014
quotequote all
Sticks. said:
I suspect it's to add warm air to the induction, which will speed warming-up and help fuel efficiency.
Thanks yes makes sense I will see whether it can be put back but I suspect the bolts will snap off.