Audi RS2 tuning?
Discussion
looks like i may be doing a deal on an rs2!
just after a bit of advice on tuning really.
what will a basic remap produce, car is std apart from a miltek exhaust system.
what other mods are worthwhile before the remap, without going mad! anything around 400/450bhp would be lovely, but i dont know how much is required to achieve this?
what will the std turbo provide before a hybrid or completely new turbo is required? would prefer to stick to a stock frame turbo, uprated rather than completely new turbo as i have a good contact who works with kkk turbos.
basically just after the normal route of tuning with these cars to release a few extra horses, without the need for engine build etc.
many thanks
nick
just after a bit of advice on tuning really.
what will a basic remap produce, car is std apart from a miltek exhaust system.
what other mods are worthwhile before the remap, without going mad! anything around 400/450bhp would be lovely, but i dont know how much is required to achieve this?
what will the std turbo provide before a hybrid or completely new turbo is required? would prefer to stick to a stock frame turbo, uprated rather than completely new turbo as i have a good contact who works with kkk turbos.
basically just after the normal route of tuning with these cars to release a few extra horses, without the need for engine build etc.
many thanks
nick
Im sure you will have found the forum you want to be on already, but if not here you go... http://www.s2forum.com/forum/
i spoke with mrc and qst, both have completely different methods of tuning these cars.
qst hold generic maps which they suit to the mods you have on your car, so no live mapping etc. just download a file. talking about 350hp ish and a load more torque on std turbo. with a bigger turbo maybe 380-400bhp
mrc do a complete new map, done to suit your car/mods etc, although its much more money, and they also insist that you replace a load of parts which total another £1200 on top of the £1200 mapping cost! in comparison qst is £500!
i have never been a fan of generic maps, surely they cant properly account for your individual car/mods/engine health etc. but at the same time, £2500 for a live map seems a bit steep to me once you have replaced all the sensors etc required. you could have a full standalone up to date system with all new sensors for that price!
does anyone have first hand experience of having a remap done on an rs2 by any of the above tuners?
i dont want to go mad. tbh i was thinking of just having the turbo modified/rebuilt with larger compressor side, and then remap. so approx 400bhp, im told no futher mods will be required at that level to support this (injectors/intercooler etc etc)
thanks for any further info
qst hold generic maps which they suit to the mods you have on your car, so no live mapping etc. just download a file. talking about 350hp ish and a load more torque on std turbo. with a bigger turbo maybe 380-400bhp
mrc do a complete new map, done to suit your car/mods etc, although its much more money, and they also insist that you replace a load of parts which total another £1200 on top of the £1200 mapping cost! in comparison qst is £500!
i have never been a fan of generic maps, surely they cant properly account for your individual car/mods/engine health etc. but at the same time, £2500 for a live map seems a bit steep to me once you have replaced all the sensors etc required. you could have a full standalone up to date system with all new sensors for that price!
does anyone have first hand experience of having a remap done on an rs2 by any of the above tuners?
i dont want to go mad. tbh i was thinking of just having the turbo modified/rebuilt with larger compressor side, and then remap. so approx 400bhp, im told no futher mods will be required at that level to support this (injectors/intercooler etc etc)
thanks for any further info
As you asked...from personal experience 380 is achievable via a generic remap from S2Central (username) on S2 forum when linked with a decent exhaust. 400+ I would say is pretty much unusable on uk roads...the standard 315 bhp RS2 saw 0-60 in 4.8 seconds and 160+ mph and 380 bhp saw the 0-60 down to 4.5. Many have run 400+ bhp but you will be looking at uprated rods, injectors, big turbo etc and then obviously the suspension and brakes too. Jump on there and have a little search 

Good advice from Al there. The Paul Nugent (s2central) generic map is well proven and safe (many are crap and disable knock control etc, use at your own peril); MRC do a good generic map as well. Both in the region of £250-300 and delivering about 360-370hp. I would only use MRC for live mapping but they won't do it any more - unless you pay through the nose as you found out. There is a chap on the s2forum that sometimes visits our shores and he'll do a live map for generic money.
Is the RS2 your looking at stock? A lot have been remapped, Milltek'd etc. It's a very capable machine with just an exhaust and remap on the stock turbo - there is also value in keeping it close to stock.
I bought mine with an old hybrid that was laggy as hell and only made 370hp (sold as a very expensive 404hp conversion to original owner and mad a hell of a lot less, with issues fixed and a live map by MRC it made 370hp but was no more capable than stock). I replaced itwith a new KKK hybrid rather than OEM, modern compressor wheel means more stock-like lag and capable of low 400s with OEM fit. However for that jump from high 300s it needed new injectors. Seeing as it was in need of engine work I had forged rods fitted and an uprated clutch to safely run lots of torque. In my opinion, going over 400hp is unnecessary in these cars and whilst the engine is bullet proof, alot of extra supporting work is required to make it reliable.
In short, circa £1k on an exhaust and generic map won't take way from the car but will unleash a lot of performance. If you want to go into the 400s then you are looking at heavy modification and thousands put into it. Although I've proven you can achieve low 400s with a newer hybrid turbo, injectors and live remap to suit... but then given in to the temptation to spend thousands more and unleash mind-mending torque in the midrange.
Is the RS2 your looking at stock? A lot have been remapped, Milltek'd etc. It's a very capable machine with just an exhaust and remap on the stock turbo - there is also value in keeping it close to stock.
I bought mine with an old hybrid that was laggy as hell and only made 370hp (sold as a very expensive 404hp conversion to original owner and mad a hell of a lot less, with issues fixed and a live map by MRC it made 370hp but was no more capable than stock). I replaced itwith a new KKK hybrid rather than OEM, modern compressor wheel means more stock-like lag and capable of low 400s with OEM fit. However for that jump from high 300s it needed new injectors. Seeing as it was in need of engine work I had forged rods fitted and an uprated clutch to safely run lots of torque. In my opinion, going over 400hp is unnecessary in these cars and whilst the engine is bullet proof, alot of extra supporting work is required to make it reliable.
In short, circa £1k on an exhaust and generic map won't take way from the car but will unleash a lot of performance. If you want to go into the 400s then you are looking at heavy modification and thousands put into it. Although I've proven you can achieve low 400s with a newer hybrid turbo, injectors and live remap to suit... but then given in to the temptation to spend thousands more and unleash mind-mending torque in the midrange.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


