A4 Avant S Line 2007 headlamp washer removal
Discussion
I'm in the process of replacing a damaged front bumper on my 2007 Audi A4 Avant S Line. It was relatively straightforward but time consuming to take the old bumper off.
The only difficulty I have now is removing the headlamp washers. I've removed the three screws which attach the washer to the bumper. If I pull the pump body back away from the bumper against some sort of spring tension I can see a circlip. It looks as though removing this circlip may separate the pump body from the spray head. I'm reticent to unclip it in case I cannot reassemble it. Can someone please advise me of the correct procedure?
Thanks, Andrew.
The only difficulty I have now is removing the headlamp washers. I've removed the three screws which attach the washer to the bumper. If I pull the pump body back away from the bumper against some sort of spring tension I can see a circlip. It looks as though removing this circlip may separate the pump body from the spray head. I'm reticent to unclip it in case I cannot reassemble it. Can someone please advise me of the correct procedure?
Thanks, Andrew.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


