Golf pd130 remap high mileage
Golf pd130 remap high mileage
Author
Discussion

Wattsym12

Original Poster:

193 posts

158 months

Friday 25th April 2014
quotequote all
Been toying with the idea of remapping my 2001 gt tdi pd130 golf car is on 141000 miles clutch and turbo seem ok I'm no mechanic but all seems fine been looking at a remap from more bhp puts the torque right up to standard clutch limit anyone had any experience with more bhp reviews all seem good also if clutch starts slipping any suggestions on uprated clutched and prices ? And replies appreciated

Grandpad58

12,549 posts

212 months

Friday 25th April 2014
quotequote all
I don't have a diesel Golf, but maybe a mild map to start (what I did) and then see how the car likes it.

HTH.

SmithyAG

300 posts

159 months

Friday 25th April 2014
quotequote all
A good friend took his Leon cupra r to more-bhp recently. They were fantastic, before and after dynos and road test with him to check he was happy.

Granted it's not the same car or engine but the service was very good.

Wattsym12

Original Poster:

193 posts

158 months

Friday 25th April 2014
quotequote all
Ok thanks guys also they offer an egr delete is this worth doing ?

si_xsi

1,325 posts

226 months

Friday 25th April 2014
quotequote all
I don't have any experience in mapping this engine, but I would proceed with caution with this age and mileage. I know the 130 and 115pd' were more robust than the 150pd.

Do you have the reserves for clutch flywheel, turbo, brakes if it goes wrong? What are the gains and is it worth it..

Hows the suspension - both front springs went on my old one.

bearman68

4,942 posts

163 months

Saturday 26th April 2014
quotequote all
My advice FWIW - and I remap a load of VW PD engines, is to go for the EGR delete as a priority (saves the turbo), and then to go for a 50:50 ecotongue outower map. It'll give you say 20 bhp extra plus a fair bit more torque, plus a bit more economy. However having the EGR off is a big plus for long term reliability / durability.

Shotgun Jon

259 posts

168 months

Saturday 26th April 2014
quotequote all
I've for a fabia vRS with 150k on the clock. It's been mapped for the last 80k. Still on the original clutch and turbo. Change the oil every 7.5k and don't nail it from 1,500 rpm in sixth and all is fine.


My clutch will slip if provoked but has done since 70k and it's still going. My mate has an a4 130 pd with 300k. It's been mapped for 200k and is still going strong.

Go for it I say.

SmithyAG

300 posts

159 months

Sunday 27th April 2014
quotequote all
bearman68 said:
My advice FWIW - and I remap a load of VW PD engines, is to go for the EGR delete as a priority (saves the turbo), and then to go for a 50:50 ecotongue outower map. It'll give you say 20 bhp extra plus a fair bit more torque, plus a bit more economy. However having the EGR off is a big plus for long term reliability / durability.
Interesting, can you explain how it saves the turbo?

Being considering the EGR delete myself. Also my mates 2.0tdi engine (Bkd) seems rather smokey on hard acceleration, which has put me off doing mine (same engine). I'm wondering if he has something wrong or just a map that's too heavy on the fuelling?

(Sorry for thread hijack!)

BGarside

1,568 posts

168 months

Monday 28th April 2014
quotequote all
Remapping made a huge difference to my Seat Leon (PD150), even though I had a mild remap to try to save the clutch - didn't work though as the clutch still slipped at 300 lb ft torque, which is apparently around the limit for a std. clutch - uprated ones are expensive.

Also check the pressure pipework unions are airtight. The bayonet connections wear and leak and the rubber o-ring seals inside the unions can deteriorate with time. Best ensure they are all sorted before upping the boost pressure with a map.

Also I understand the PD130 has a small intercooler mounted somewhere in the wheelarch. May be worth checking that is clean and has some airflow through it (some people put vents in the wheelarch liner to promote flow through the 'cooler) before getting the engine mapped.

CorradoTDI

1,840 posts

202 months

Monday 28th April 2014
quotequote all
141k isn't a lot on these engines as long as it's had regular oil changes with the correct PD spec oil.

As long as it's working ok, no fault codes etc then i'd go for it but budget for a clutch and flywheel too. The clutch will most likely be ok but the DMF will be getting 'wobbly'


Wattsym12

Original Poster:

193 posts

158 months

Monday 28th April 2014
quotequote all
Car has actually broken down a plastic box on drivers side front right behind the bumper has come in half now leaks oil and black smoke when running people are saying inter cooler but I thought that was passenger side and only had it done about 4 months ago anyone got any ideas on what it

Edited by Wattsym12 on Monday 28th April 19:40

SmithyAG

300 posts

159 months

Monday 28th April 2014
quotequote all
Can you take a picture? Or find a photo online of the offending article?

Might help narrow it down

SmithyAG

300 posts

159 months

Monday 28th April 2014
quotequote all
From re-reading the problem it does sound like part of the intake system (post turbo), as excess crankcase pressure is vented into the intake. So it would explain the oil, and loss of boost pressure would explain the black smoke.

Wattsym12

Original Poster:

193 posts

158 months

Monday 28th April 2014
quotequote all
I have been told that but can't get it anywhere to be looked at will take a pic in the morning I've thought about remapping twice and each time something has gone wrong so irritating cheers for the response

Wattsym12

Original Poster:

193 posts

158 months

Tuesday 29th April 2014
quotequote all
SmithyAG can you email me I've just tryed to upload photo and email you but ph doesn't seem to like iphone cheers

bearman68

4,942 posts

163 months

Wednesday 30th April 2014
quotequote all
Hi.

When you have 5 mins google BKD engine turbo troubles. You'll see somany issues with the turbo over or under boosting. I replaced 2 turbos in 2 weeks on these engines, and both had jammed vanes on the variable boost control. It's my belief that st passing through the engine causes those problems. Where does the st come from? - from the egr valve. Hence my comment that removing the EGR is a significant step forward in maintaining the life of the turbo. (The BKD turbo's were both good apart from the jammed vanes, and of course oil changes are a premium requirement in maintaining the bearings within the turbo, it goes without saying).

Cheers

SmithyAG

300 posts

159 months

Thursday 1st May 2014
quotequote all
bearman68 said:
Hi.

When you have 5 mins google BKD engine turbo troubles. You'll see somany issues with the turbo over or under boosting. I replaced 2 turbos in 2 weeks on these engines, and both had jammed vanes on the variable boost control. It's my belief that st passing through the engine causes those problems. Where does the st come from? - from the egr valve. Hence my comment that removing the EGR is a significant step forward in maintaining the life of the turbo. (The BKD turbo's were both good apart from the jammed vanes, and of course oil changes are a premium requirement in maintaining the bearings within the turbo, it goes without saying).

Cheers
Thanks for taking the time to respond bearman. Believe me, you don't need to tell me about the turbo troubles on BKD engines, mine went just before christmas and filled the intercooler with oil etc. A certain big motor factors then sent me a recon turbo and it died within 100 miles, intake impeller fins sheared off and stuck in intercooler. They did refund me though tbf. Ended up costing £950, as the intercooler etc had to come off twice. (Look at my posting history from Christmas time, caused me a right headache!).

I also had a failed EGR valve at one point, so understand how they work etc. However for some reason I have never put 2 and 2 together and realised that recirculating dirty exhaust gas back through the engine and ultimately through the turbo would cause the sticking vanes!

Many thanks for the reply!