Audi tts brake noise - hissing -
Discussion
So i noticed the noise the other week, a kind of hissing noise that went away when i'd apply the brakes when moving - presumed it was a dragging pad or something so did some brake tests. This didnt get rid of the noise. I noticed tonight whilst in traffic, whilst stationary that the noise is there when idle, but it goes away when the brakes are applied.. Not sure hissing noise is the best way to describe it, hissing / whine perhaps - but it definitely goes away when the brakes are applied.. I'm not that technically minded but can only thing the brake master cylinders at fault? The brakes work normally and work well.
I've posted this on the tt forum and people have pointed to having to replace the master cylinder which is a 6-10 hour job(engine has to be dropped to get to it - part is only £50!). Can any of you shed any light on what else this could be, and if you've had this issue with your 8j tt?
More importantly are my brakes just going to give up the ghost without warning?
Thanks
I've posted this on the tt forum and people have pointed to having to replace the master cylinder which is a 6-10 hour job(engine has to be dropped to get to it - part is only £50!). Can any of you shed any light on what else this could be, and if you've had this issue with your 8j tt?
More importantly are my brakes just going to give up the ghost without warning?
Thanks
Edited by PorkRind on Tuesday 10th June 10:22
I can't see why the master cylinder would make a hissing or whining noise; it's purely hydraulic. It's possible that a servo can hiss if it's leaking, could also be a vacuum line or join on one.
Simplest check is going to be to look over any vacuum hoses you can see; I know that engine bay is pretty tight for space to work in but a bit of rubber hose is going to be a lot cheaper than doing any work in the servo area.
Simplest check is going to be to look over any vacuum hoses you can see; I know that engine bay is pretty tight for space to work in but a bit of rubber hose is going to be a lot cheaper than doing any work in the servo area.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


