05 TFSI engine oil ?
Discussion
Oh, I thought you were making a joke about the fact I'm not actually "running" it on the oil.
In actuality I meant Edge FST, not GTX. Was it that perchance? Horror at the fact I was running it on semi synthetic? Don't know why I always confuse the two.
Looking at the bottle I've got kicking around here, it's 5W40 as well so I was wrong on all counts!
This one:

In actuality I meant Edge FST, not GTX. Was it that perchance? Horror at the fact I was running it on semi synthetic? Don't know why I always confuse the two.
Looking at the bottle I've got kicking around here, it's 5W40 as well so I was wrong on all counts!
This one:

Edited by ManOpener on Sunday 22 June 18:26
Basically VW revised the diverter valve design several times after production as the initial ones were failing, particularly on remapped applications and in colder climates where the rubber inside them was more prone to perishing. This was leading to boost leaks, particularly at WOT and in high load applications, and in really serious cases the CEL illuminating with various error codes related to boost control.
AFAIR the original was Rev. B, which was replaced by Rev. C and then Rev. G. All of these are rubber diaphragm designs which are prone to failure, which looks something like this:

They're supposed to be "updated" but as far as I know the only actual difference between each is the colour of the rubber diaphragm.
The Rev. D version is entirely different, being a piston type similar to most of the aftermarket ones like Forge. This is much hardier and not really prone to failure, to the degree that several of the reputable tuners recommend using the OEM revision over the various much more expensive aftermarket options.
Rev. D compared to a G (I think, fairly sure that the G is orange):

AFAIR the original was Rev. B, which was replaced by Rev. C and then Rev. G. All of these are rubber diaphragm designs which are prone to failure, which looks something like this:

They're supposed to be "updated" but as far as I know the only actual difference between each is the colour of the rubber diaphragm.
The Rev. D version is entirely different, being a piston type similar to most of the aftermarket ones like Forge. This is much hardier and not really prone to failure, to the degree that several of the reputable tuners recommend using the OEM revision over the various much more expensive aftermarket options.
Rev. D compared to a G (I think, fairly sure that the G is orange):

The revision G valve is by far and away the best valve to use.
Revision D has been tested and proven to leak up to 3psi boost from the factory. So sure, it won't degrade over time like a rubber diaphramed valve, however it is not good for performance or economy.
Revision G is around £40 and can be changed in about 15 minutss on a ramp or an hour of leisurely work on your driveway on a K03s eequipped car or about 30 seconds on a K04 car as they have a remote valve.
I would buy a G and just replace it as part of your yearly service, or fit a boost gauge and you'll be able to monitor the levels so you can see when it's starting to lose boost.
Revision D has been tested and proven to leak up to 3psi boost from the factory. So sure, it won't degrade over time like a rubber diaphramed valve, however it is not good for performance or economy.
Revision G is around £40 and can be changed in about 15 minutss on a ramp or an hour of leisurely work on your driveway on a K03s eequipped car or about 30 seconds on a K04 car as they have a remote valve.
I would buy a G and just replace it as part of your yearly service, or fit a boost gauge and you'll be able to monitor the levels so you can see when it's starting to lose boost.
xjay1337 said:
Revision G is around £40 and can be changed in about 15 minutss on a ramp or an hour of leisurely work on your driveway on a K03s eequipped car or about 30 seconds on a K04 car as they have a remote valve.
I would buy a G and just replace it as part of your yearly service,
Thanks, a K03 and no ramp unfortunately, when I have the undertray off to change the oil where's the DV located ?I would buy a G and just replace it as part of your yearly service,
blade7 said:
Thanks, a K03 and no ramp unfortunately, when I have the undertray off to change the oil where's the DV located ?
You don't need to take the under tray off however having the drivers side arch liner off helps loads... it's above the driveshaft on the side of the turbo, you'll see it from the Drivers side.Take the wheel off for access.
It's the black thing here

You'll see it easily there are 4 bolts around it, only 3 hold it on but the 4th is a retainer for an oil line so helps to undo all 4... and then obviously remove the clip sensor.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff



.
