Golf 7 wheels
Author
Discussion

adaM3

Original Poster:

633 posts

248 months

Wednesday 6th July 2016
quotequote all
I've just signed up for an R estate and whilst I wait, I'm considering sourcing a set of 19's for it. I'm a sucker for OEM so suspect they will be VAG wheels I go for.

Some of the Tiguan wheels look good - they do an 8x19 wheel (that comes with 235/35/19). Would these work? I'd like to bring the wheels out anyway as the standard wheels seem to sit a bit too far in. I'd change the tyres regardless as I'm not a fan of the off-road look. Edit: Actually, I wonder if these tyres might be ok.

Edited by adaM3 on Wednesday 6th July 11:27

jimi

521 posts

293 months

Wednesday 6th July 2016
quotequote all
Why are you modding a lease car?


adaM3

Original Poster:

633 posts

248 months

Wednesday 6th July 2016
quotequote all
Because for two years it's still "My car" and I don't like the wheels.

ayman82

1,602 posts

211 months

Wednesday 6th July 2016
quotequote all
What about the BBS CHs? I think EGoold has them - they look pretty nice.

Otherwise what about the 19" Pretorias? They're pretty expensive though.

KryptonKid09

193 posts

151 months

Wednesday 6th July 2016
quotequote all
You need to think about offset with those Tiguan wheels. I have (aftermarket) 18x8 on my Mk5 Golf which shares the same sized stock wheels as the Mk7 R. The stock offet for the MK5 is 51mm (with a 7.5" wide wheel) and my new wheels have a 48mm offset. This means they I get 3mm less clearance inboard and the wheels stick out 9mm further. I get no rubbing either side. If you go with a larger diameter wheel, you could get rubbing issues on the suspension strut and/ or the wheel arch.

If you're serious about handling, you also need to think about changes to steering axis inclination (SAI) but that's a whole other discussion...

This is a great site to use to get an understanding of possible fitment issues: https://www.1010tires.com/Tools/Wheel-Offset-Calcu...

Paul

adaM3

Original Poster:

633 posts

248 months

Wednesday 6th July 2016
quotequote all
Cheers Paul, will have a read.