SQ5 stop/start
Discussion
On earlier cars it could be coded with VCDS etc. to memorise last state (default off or just be off permanently) rather than default to on. I have done this on my S4 but I know on many recent models (e.g. my Wife's Q2) it can't be done for environmental reasons, so not sure on that model?
Otherwise it may be able to be 'tricked' into not working - stop/start only works if certain conditions (load, temp, battery charge etc.) are met so changing the parameters may do the job?
If not there are 'modules' for sale on ebay and the like that will re-activate the last state when engine started so if it was off it will come back on in the off position.
Otherwise it may be able to be 'tricked' into not working - stop/start only works if certain conditions (load, temp, battery charge etc.) are met so changing the parameters may do the job?
If not there are 'modules' for sale on ebay and the like that will re-activate the last state when engine started so if it was off it will come back on in the off position.
Edited by catso on Tuesday 8th December 10:30
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


