A6 54reg rear pads
Author
Discussion

m12kop

Original Poster:

263 posts

246 months

Sunday 5th October 2008
quotequote all
Help needed, i'm trying to fit some rear pads to a 54reg A6,any ideas how to set the piston to allow pads in? not tried push and twist incase that was wrong! Thanks in advance.

hman

7,497 posts

224 months

Sunday 5th October 2008
quotequote all
you need a caliper rewind tool, halfrauds have them...

m12kop

Original Poster:

263 posts

246 months

Sunday 5th October 2008
quotequote all
I've got one but didn't try using it because there were no pin holes in the end of the piston and wasn't sure if the electronic hand brake reset in the same way as a manual hand brake.

Dilligaf10

2,431 posts

240 months

Sunday 5th October 2008
quotequote all
Just had the rear pads done on my '06 A8l.

I understand that the rear calipers are wound back electronically via the MMI and plug in diagnostic thingy.

Tame Technician

2,467 posts

234 months

Sunday 5th October 2008
quotequote all
If its got electric hand brake, The electric motors have to be wound back first with diagnostic computer, then the pistons them selves need to be pushed back, not turned like most rear pads.

If its got normal manual cable hand brake, just wind them in like normal.

aaron190175

6 posts

216 months

Monday 6th October 2008
quotequote all
If you want to do this yourself get hold of VAG-Com from Ross-tech.com.
It's a very good VAG diagnostic tool.

m12kop

Original Poster:

263 posts

246 months

Monday 6th October 2008
quotequote all
Thanks for all your help.