Tame Technician or anyone please help...

[paoloh]

//////////////////////////////////////////////////////////////
V30 Diagnosis Report Autoboss
Time:2009-10-05 17:32:47
**************************************

02-Interrogate fault memory

Fault code Description Status

---

01314 Engine control unit 013 Check DTC Memory

What is this and how do I rectify it?

It is on an 05 TT

[Tame Technician]

Which module did that code come from? And what was wrong with the car, if anything.

You normally see that in ABS or gearbox, When there is a fault in the engine management system that is also relevant to the module that has that code in.

Like a brake light switch fault, will stored codes in ABS engine and gearbox, when you clear the fault memory in ABS for example ABS then logs a code to tell you to check the engine fault memory, and thats what you have there.

Need more input from you on this

[paoloh]

Traction control light is on

[klimakool]

what model of car is it, mileage?

has it had brakes/tyres/suspension work done recently?

[paoloh]

klimakool said:

what model of car is it, mileage?

has it had brakes/tyres/suspension work done recently?

05 TT with 20k.

[paoloh]

With no work to my knowledge

[klimakool]

its going to be an abs sensor or stator ring, thats the usual faults. need the fault code to help more though. i've done 2 sensors and a drive shaft on my sister in laws tt over the past 2 years

[Tame Technician]

Need to know the fault codes in the engine and ABS control modules.

My money is on a brake light switch. But it could be any of the other suggestions above. You need to read the fault memory from all the modules again.

What module did that fault code you have come from??