AUDI RS4: WHATS THE BEST AFTER MKT EXHAUST FOR RS4?

[tomvcarter]

MILLTEK?

[red355]

Have you heard a Milltek on an RS4? awesome

[TonyHetherington]

red355 said:

Have you heard a Milltek on an RS4? awesome

Milltek are the recognised greats in this particular field

[worsy]

Some alternatives

http://www.supersprintuk.com/a4-b7-rs4-quattro-06-...

http://www.mtm-online.de/en/Audi/RS4-B7/4-2-l-309-...

[Dr G]

Milltek resonated and switchable for me please

[viper paul]

Thought mine sounded good enough with just the flaps disabled, but the miltek is the best product sound wise.

[tomvcarter]

I heard there was an Eisenmann available for the RS4, do you know anything about this?

[Dr G]

Never seen one I'm afraid.

[ecain63]

You got a B5 or B7?

[tomvcarter]

looking to buy a B7, but had my head turned by a 2004 RS6... woudl this be a mistake. Performance i almost identical for the same price

[iluvmercs]

I've been keeping a keen eye on this topic, as it's a mod I'm keen to do soon!

On a little side to this topic, can anyone tell me what the difference is between Resonated and Non Resonated for the Milltek system? I've seen both these advertised and I'm not too sure what the difference is, beyond one of them being alot louder.

Also, what exhaust manufacturer would be good for daily use? I'm not too keen on getting a splitting headache everytime I drive the car!

Many thanks, and sorry for the slight O/T tangent!

Darren

[Healey73]

iluvmercs said:

I've been keeping a keen eye on this topic, as it's a mod I'm keen to do soon!

On a little side to this topic, can anyone tell me what the difference is between Resonated and Non Resonated for the Milltek system? I've seen both these advertised and I'm not too sure what the difference is, beyond one of them being alot louder.

Also, what exhaust manufacturer would be good for daily use? I'm not too keen on getting a splitting headache everytime I drive the car!

Many thanks, and sorry for the slight O/T tangent!

Darren

Hi Darren

I think that is the only difference, a resonated exhaust system will give you a little extra power without increasing the exhaust noise much whereas a non-resonated will give you extra power and a louder exhaust note but please be aware that I'm no expert!

[Andyuk911]

Healey73 said:

iluvmercs said:

I've been keeping a keen eye on this topic, as it's a mod I'm keen to do soon!

On a little side to this topic, can anyone tell me what the difference is between Resonated and Non Resonated for the Milltek system? I've seen both these advertised and I'm not too sure what the difference is, beyond one of them being alot louder.

Also, what exhaust manufacturer would be good for daily use? I'm not too keen on getting a splitting headache everytime I drive the car!

Many thanks, and sorry for the slight O/T tangent!

Darren

Hi Darren

I think that is the only difference, a resonated exhaust system will give you a little extra power without increasing the exhaust noise much whereas a non-resonated will give you extra power and a louder exhaust note but please be aware that I'm no expert!

It has been proven that without a remap, power will be reduced. The car is very sensitive to the exhaust.

Miltek have a number of options depending on what you required.

Be WARNED, if you go for a NON valved system, make sure you block off the vacuum pipes, otherwise you will be driving a 300bhp car ...

Most details on the pros and cons of each system can be found on RS246.

If you have deep pockets have a look at ..

http://www.youtube.com/watch?v=BLLiADh_uHY

HTH

[missing the VR6]

http://www.youtube.com/watch?v=BLLiADh_uHY

Wow, that might be the best sound I've ever heard!

[Juicetin1]

Tubi do a good one:

http://www.youtube.com/watch?v=lC4AhoyoDig&NR=...

[426Hemi]

only 1 clear choice for me....Capritso, a bit more expensive but look and sound great.

[OzCupra]

iluvmercs said:

I've been keeping a keen eye on this topic, as it's a mod I'm keen to do soon!

On a little side to this topic, can anyone tell me what the difference is between Resonated and Non Resonated for the Milltek system? I've seen both these advertised and I'm not too sure what the difference is, beyond one of them being alot louder.

Also, what exhaust manufacturer would be good for daily use? I'm not too keen on getting a splitting headache everytime I drive the car!

A resonated Milltek system would be your best option with Exhaust Valves. Still get a nice tone from it without the headaches. Resonated runs a smaller mid box in the system just to cut the noise slightly.



At just over £2K for this system (Cat Back) and as suggested in another post it may well be worth spending the extra on downpipes with high flow cats and a Remap to gain the full benefit of fitting this system.

[Guffy]

I have a Milltek non-valve/non-res fitted and it's just fantastic to hear. Even people who don't really get off on cars go all gooey when they hear it.

It's not overly noisy on a cruise either, although i've come from TVR's so no surprise there

Last rolling road session showed no power loss either, 380-ish Bhp, which is OK for an otherwise standard car.

[Johnyanorak]

Dont get the rs6 they are dopey and droopey compared to rs4s , which are lively snappy and love corners , ps miltek straight through or a MTM

[jonnM]

This is the best sounding RS4 I've ever heard.

https://www.youtube.com/watch?v=ZRPhVxGUCNQ