Audi A3 - Lumpy When Cold
Discussion
Another ongoing problem with my oh-so-reliable german car 
1997 Audi A3 1.8T Sport
When the engine is cold and has bothered to start without human intervention (see other thread), if i accelerate hard whilst the engine is cold it starts to run lumpy and rattly, with pretty much zero power until the temp gauge has reached the mid way point, after this it's fine and returns to normal. If i drive it like an old woman until it reaches this temp, it's fine.
A symptom of this may or not be the coolant warning symbol (and accompanying beeeeeeeeeep) coming up on the message centre when i start the car as it performs a self-test (only happens when engine is cold as stated above). I've had the message checked and was told it was a duff sensor. The engine is getting coolant and has plenty of it.
I've changed the coolant temp sensor just to be sure, but i still get the lumpy running and message centre warning (flashing thermometer symbol)
So...what next? I've found a list of seemingly never ending stuff it can be on "vw vortex" which doesnt really help me much. Thinking of giving the MAF a clean out with some isopropyl and seeing if that helps
any suggestions? Want to try everything i can do myself before shelling out for a garage to take a look
Cheers
Dave

1997 Audi A3 1.8T Sport
When the engine is cold and has bothered to start without human intervention (see other thread), if i accelerate hard whilst the engine is cold it starts to run lumpy and rattly, with pretty much zero power until the temp gauge has reached the mid way point, after this it's fine and returns to normal. If i drive it like an old woman until it reaches this temp, it's fine.
A symptom of this may or not be the coolant warning symbol (and accompanying beeeeeeeeeep) coming up on the message centre when i start the car as it performs a self-test (only happens when engine is cold as stated above). I've had the message checked and was told it was a duff sensor. The engine is getting coolant and has plenty of it.
I've changed the coolant temp sensor just to be sure, but i still get the lumpy running and message centre warning (flashing thermometer symbol)
So...what next? I've found a list of seemingly never ending stuff it can be on "vw vortex" which doesnt really help me much. Thinking of giving the MAF a clean out with some isopropyl and seeing if that helps
any suggestions? Want to try everything i can do myself before shelling out for a garage to take a look
Cheers
Dave
Edited by petersLUFC on Tuesday 17th November 17:27
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


