VW Corrado VR6/G60
Discussion
Hello guys.
Having sold my Mk2 Gti just under a year ago, and pootling around in a 405, I have decided its time to get something fun again and I want to scratch the Corrado itch so to speak. I always wanted one, more so over a Golf, but at the time the Golf came up at the right price etc.
Im just looking for some oppinions from people on here that have owned/own/driven either a G60 or a VR6 Corrado and which one you think is the best option. I have read up a fair bit on owners clubs, but you seem to get the usual fan boys of either one so never get an un-biased oppinion.
From what I have read, I have come to my own conclusion that a G60 is quite tunable (Stock around 170bhp give or take) but needs a rebuild every 60k miles for a G-ladder charger or half that for a aftermarket charger from Jabba Sport etc. Are these engines reliable for high mileage? I believe they are essentialy a Mk2 1.8 8v bored out to 1.9. The VR6 being a 2.9 leads me to believe that it can handle higher mileage (is this logical thinking?) and has around 195bhp stock so is naturally quicker from factory. Only main concern I have read is timing chain wear, and is very expensive to replace.
I mention mileage alot as its rare to find either of these cars with less than 100k miles on the clock, so have to take into account im buying an old car that will possibly need attention soon.
Any help provided would be greatley appreciated.
Having sold my Mk2 Gti just under a year ago, and pootling around in a 405, I have decided its time to get something fun again and I want to scratch the Corrado itch so to speak. I always wanted one, more so over a Golf, but at the time the Golf came up at the right price etc.
Im just looking for some oppinions from people on here that have owned/own/driven either a G60 or a VR6 Corrado and which one you think is the best option. I have read up a fair bit on owners clubs, but you seem to get the usual fan boys of either one so never get an un-biased oppinion.
From what I have read, I have come to my own conclusion that a G60 is quite tunable (Stock around 170bhp give or take) but needs a rebuild every 60k miles for a G-ladder charger or half that for a aftermarket charger from Jabba Sport etc. Are these engines reliable for high mileage? I believe they are essentialy a Mk2 1.8 8v bored out to 1.9. The VR6 being a 2.9 leads me to believe that it can handle higher mileage (is this logical thinking?) and has around 195bhp stock so is naturally quicker from factory. Only main concern I have read is timing chain wear, and is very expensive to replace.
I mention mileage alot as its rare to find either of these cars with less than 100k miles on the clock, so have to take into account im buying an old car that will possibly need attention soon.
Any help provided would be greatley appreciated.
Had a VR6 for 5 years or so up to about 3 years ago.
Bought at 75000 miles and sold at 160000 miles.
Mine was completely standard apart from a K&N filter.
Great to drive, torquey engine but also woke up at high revs.
Didn't touch the timing chain all the time I had it. Apparently the risk is that the tensioner pad wears and the chain goes slack and rattles around damaging the block / casing.
Gently rev the engine up to about 2500/3000 and then listen for the rattle as the engine returns to idle. If it's noisy then it's probably worth changing. Mine never went noisy.
Timing chain is on the gearbox end of the engine which is why it's expensive to change - gearbox has to come off.
My plan was to change the chain when the clutch needed doing or to change the clutch when the chain needed doing. Clutch (yes the original one) never wore out and the chain never went noisy.
It's expensive to get more power out of a VR6 (190hp as standard) so probably not a car to bother tuning.
G60 is 160hp as standard and I believe its relatively simple to have the supercharger modified when you have it reconditioned for more power.
The only problems I had with mine were plastic parts of the cooling system going brittle through age and heat, a coil pack failing (common) and a little rust here and there - they're built by Karmann and don't have as good rust proofing as a factory VW of the same age.
Sunroofs can jam and it needs the headlining to be removed to remove the mechanism and fix it.
I would have kept mine and thrown £1200 at the clutch and chain but the family grew in size and I needed a car with more doors.
Find one with a small number of owners and a large number of bills accumulated from VW specialists at regular intervals and you'll have a great car.
Bought at 75000 miles and sold at 160000 miles.
Mine was completely standard apart from a K&N filter.
Great to drive, torquey engine but also woke up at high revs.
Didn't touch the timing chain all the time I had it. Apparently the risk is that the tensioner pad wears and the chain goes slack and rattles around damaging the block / casing.
Gently rev the engine up to about 2500/3000 and then listen for the rattle as the engine returns to idle. If it's noisy then it's probably worth changing. Mine never went noisy.
Timing chain is on the gearbox end of the engine which is why it's expensive to change - gearbox has to come off.
My plan was to change the chain when the clutch needed doing or to change the clutch when the chain needed doing. Clutch (yes the original one) never wore out and the chain never went noisy.
It's expensive to get more power out of a VR6 (190hp as standard) so probably not a car to bother tuning.
G60 is 160hp as standard and I believe its relatively simple to have the supercharger modified when you have it reconditioned for more power.
The only problems I had with mine were plastic parts of the cooling system going brittle through age and heat, a coil pack failing (common) and a little rust here and there - they're built by Karmann and don't have as good rust proofing as a factory VW of the same age.
Sunroofs can jam and it needs the headlining to be removed to remove the mechanism and fix it.
I would have kept mine and thrown £1200 at the clutch and chain but the family grew in size and I needed a car with more doors.
Find one with a small number of owners and a large number of bills accumulated from VW specialists at regular intervals and you'll have a great car.
I've owned both and the only option is the VR6.
My G60 was dyno'd at 201bhp, cam, chip, pulley, exhaust, de-wedged throttle body, mocal oil cooler and induction kit, the VR6 was standrd bar the obligatory K&N.
The main issue for me withthe G60 was the gearbox, 1st & 2nd are too short and 3rd is too long, I found 2nd would only take me to 55 the need to change but because 3rd was too long it would fall off boost in the change and then need a couple of seconds to build the boost again, VERY annoying when overtaking! Also below 60 my 8V MK2 I had before felt as quick, the g60 is very quick once you're doing over 70,but I found the gearbox uncondusive to a good drive on twisty roads. A few people I know have described the g60 as a motorway cruiser which I'd have to agree with.
The VR6 was just sublime effortless power will still keep up with plenty of modern hatches, only slight critisism is it's a little nose heavy. Above all else the noise oh the noise!
Almost forgot, the G60 in the year I owned it did 2 bottom ends and a charger, the charger had also been serviced within 40K of it blowing!
I think I was very unlucky with the engine, so wouldn't hold it against it, as one day I plan to own a Rallye. The biggest issue is it just wasn't as quick as I felt it should be.
My G60 was dyno'd at 201bhp, cam, chip, pulley, exhaust, de-wedged throttle body, mocal oil cooler and induction kit, the VR6 was standrd bar the obligatory K&N.
The main issue for me withthe G60 was the gearbox, 1st & 2nd are too short and 3rd is too long, I found 2nd would only take me to 55 the need to change but because 3rd was too long it would fall off boost in the change and then need a couple of seconds to build the boost again, VERY annoying when overtaking! Also below 60 my 8V MK2 I had before felt as quick, the g60 is very quick once you're doing over 70,but I found the gearbox uncondusive to a good drive on twisty roads. A few people I know have described the g60 as a motorway cruiser which I'd have to agree with.
The VR6 was just sublime effortless power will still keep up with plenty of modern hatches, only slight critisism is it's a little nose heavy. Above all else the noise oh the noise!
Almost forgot, the G60 in the year I owned it did 2 bottom ends and a charger, the charger had also been serviced within 40K of it blowing!
I think I was very unlucky with the engine, so wouldn't hold it against it, as one day I plan to own a Rallye. The biggest issue is it just wasn't as quick as I felt it should be.
have a read of this, its a US based site so SLC is a VR6 but it covers some good points. Also remember a US rado is 2.8VR like a mk3 golf over here so nearer 180hp than 190hp.
http://forums.vwvortex.com/zerothread?id=272457
You could have best of both and get a VR6 now and in the future get a supercharger conversion = circa 300hp + 300lbs torque.
Note the G60 isnt as unreliable as some people make them out to be, so long as good oil is used and the oil feed to the charger + charger belt is upgraded it will be fine for 60+k. my uncles is running on 88k on its original charger (ticking time bomb you may say but no evidence of ill health at present)
2.9 VR6 can be expensive when chains an clutch + head gasket need doing but this is usually a one of event in as they can get to some silly high millages well over 120-150k before they play up. Its usually the chain guides that fail and start rattling but the problem is parts of the guides get into the engine and start causeing damage. Another thing to note is a VR6 can wear its bores oval. The result of oval bores is smoking on over run and after WOT plus once engine up to temp blue smoke on idle to. New piston rings can mask the problem in the short term but wont fix the problem - only new pistons or new block. 2.9 blocks can sell for £4-500 but i set of uprated 83+mm pistons to increase capacity to 3.0+ is circa £4-800 depending on final spec OR you can buy a 2.8 block and so long as your 2.9 pistons are in good order get the block bored to accept bigger pistons as 2.8 blocks are a lot cheaper.
dave
http://forums.vwvortex.com/zerothread?id=272457
You could have best of both and get a VR6 now and in the future get a supercharger conversion = circa 300hp + 300lbs torque.
Note the G60 isnt as unreliable as some people make them out to be, so long as good oil is used and the oil feed to the charger + charger belt is upgraded it will be fine for 60+k. my uncles is running on 88k on its original charger (ticking time bomb you may say but no evidence of ill health at present)
2.9 VR6 can be expensive when chains an clutch + head gasket need doing but this is usually a one of event in as they can get to some silly high millages well over 120-150k before they play up. Its usually the chain guides that fail and start rattling but the problem is parts of the guides get into the engine and start causeing damage. Another thing to note is a VR6 can wear its bores oval. The result of oval bores is smoking on over run and after WOT plus once engine up to temp blue smoke on idle to. New piston rings can mask the problem in the short term but wont fix the problem - only new pistons or new block. 2.9 blocks can sell for £4-500 but i set of uprated 83+mm pistons to increase capacity to 3.0+ is circa £4-800 depending on final spec OR you can buy a 2.8 block and so long as your 2.9 pistons are in good order get the block bored to accept bigger pistons as 2.8 blocks are a lot cheaper.
dave
I've never driven a G60 so can't comment on this particular model.
I have owned a VR6 model for five years and when I was looking for one I heard lots of scary stories about timing chains. They have a self-tensioner (I think that is the correct term. Someone will be along soon to correct me or explain in more detail). This means at it will regulate itself. If it gets to the point when it cannot regulate any further you will start to hear an audible rattle. This is a warning that the chain needs replacing. As has already been stated, the damage is caused when stray parts get into the engine.
My car has 160,000 miles on the clock. When I bought it it had 113,000 miles on it. I was naturally concerned about the high mileage. Since owning it I have made sure that it is serviced regularly with a mid-year mini service. (I change the oil and oil filter every 5,000 miles.) This has ensured that I keep on top of any possible issues.
Given the age of these vehicles it is unlikely that you'll find a low mileage model. Mine has high mileage but it is in perfect mechanical condition and it's power output remains as high as the day it left the factory. It has plenty of power and can go from 0-60MPH smoothly and effortlessly, holding its own against many modern performance cars. It cruises well at 120MPH (on the Autobahn that is). It has all the poke you'll need really, but if you want to add more power there are a number of options available to you. Your only restriction might be your wallet.
The best thing really is to have a test drive. It fitted like a glove when I did this. I have found it one of the easiest and most enjoyable cars to drive. One last point though, as has already been suggested, it is nose heavy so if you need to stop very quickly at high speeds you'll need to be pretty good at steering
I have owned a VR6 model for five years and when I was looking for one I heard lots of scary stories about timing chains. They have a self-tensioner (I think that is the correct term. Someone will be along soon to correct me or explain in more detail). This means at it will regulate itself. If it gets to the point when it cannot regulate any further you will start to hear an audible rattle. This is a warning that the chain needs replacing. As has already been stated, the damage is caused when stray parts get into the engine.
My car has 160,000 miles on the clock. When I bought it it had 113,000 miles on it. I was naturally concerned about the high mileage. Since owning it I have made sure that it is serviced regularly with a mid-year mini service. (I change the oil and oil filter every 5,000 miles.) This has ensured that I keep on top of any possible issues.
Given the age of these vehicles it is unlikely that you'll find a low mileage model. Mine has high mileage but it is in perfect mechanical condition and it's power output remains as high as the day it left the factory. It has plenty of power and can go from 0-60MPH smoothly and effortlessly, holding its own against many modern performance cars. It cruises well at 120MPH (on the Autobahn that is). It has all the poke you'll need really, but if you want to add more power there are a number of options available to you. Your only restriction might be your wallet.
The best thing really is to have a test drive. It fitted like a glove when I did this. I have found it one of the easiest and most enjoyable cars to drive. One last point though, as has already been suggested, it is nose heavy so if you need to stop very quickly at high speeds you'll need to be pretty good at steering

Edited by EmmaP on Monday 29th March 15:24
they are amazing cruisers, especially when VR powered.
a friend has a VR rado, 95 on an M plate, coil-over suspension, polyeurethene(sp) engine mounts, better discs and pads, and its great. he has a full milltek system and de-cat, and a CDA carbon air intake, it sounds amazing!!!
the VR is the engine of choice.
a friend has a VR rado, 95 on an M plate, coil-over suspension, polyeurethene(sp) engine mounts, better discs and pads, and its great. he has a full milltek system and de-cat, and a CDA carbon air intake, it sounds amazing!!!
the VR is the engine of choice.
regarding the VR chains, its the tensioners that wear out and not the chains themselves. The guides are made of layered material which is rivited together, on early VR engines these were plastic rivits and the single top guide is most prone to wear - hence you can hear a apparent rattling from the right side of the engine caused by chains flicking off the tensioner rather than smoothly following it. The later Vr6 engines have a better design with 2 chains + guides and metal rivits and tend to last longer - it will be worth investigating if it is possible to run this set up on a corrado VR engine.
Sometimes people just replace the top tensioner which can be done without having to seperate the box an block.
When you consider chains/Clutch is circa £600 from a independent and lasts well beyond 100k, in that time you are likely to need at least one if not two G60 rebuilds at £300-400 standard spec or £500+ if you have it modified then its not such a scary bill and doesnt make a VR significantly more expensive to run.
dave
Sometimes people just replace the top tensioner which can be done without having to seperate the box an block.
When you consider chains/Clutch is circa £600 from a independent and lasts well beyond 100k, in that time you are likely to need at least one if not two G60 rebuilds at £300-400 standard spec or £500+ if you have it modified then its not such a scary bill and doesnt make a VR significantly more expensive to run.
dave
Emma - for future reference this guide is pretty dam good (although based on a US spec car) at showing the major components an shows how the top guides can be replaced.
http://forums.vwvortex.com/zerothread?id=1264409
The guy who wrote the thread comments that his chain guides were on 150k with only minimal amounts of wear to the main surfaces and would last a lot longer had it not been for one guide had cracked and a chunk was rattling around in the engine which prompted him to examine further.
Dave
http://forums.vwvortex.com/zerothread?id=1264409
The guy who wrote the thread comments that his chain guides were on 150k with only minimal amounts of wear to the main surfaces and would last a lot longer had it not been for one guide had cracked and a chunk was rattling around in the engine which prompted him to examine further.
Dave
Another ex VR6 owner here.
We bought and owned it for 3 years. It had 146k when we sold it. Original chain.
I decided to take it for one last drive before handing it over, and very nearly didn't.
It has am induction kit, and full milltek, including a decat, and the sound is at least as good as my 911.
Issues we had with the car were, as mentioned before, the plastic bits connecting to the engine went brittle, so new crack pipe, thermostat housing etc. Also needed a rad, and heater matrix. The annoying thing was that everything went at seperate times, but all of the above are common failiures.
We bought and owned it for 3 years. It had 146k when we sold it. Original chain.
I decided to take it for one last drive before handing it over, and very nearly didn't.
It has am induction kit, and full milltek, including a decat, and the sound is at least as good as my 911.
Issues we had with the car were, as mentioned before, the plastic bits connecting to the engine went brittle, so new crack pipe, thermostat housing etc. Also needed a rad, and heater matrix. The annoying thing was that everything went at seperate times, but all of the above are common failiures.
Tino said:
Another ex VR6 owner here.
We bought and owned it for 3 years. It had 146k when we sold it. Original chain.
I decided to take it for one last drive before handing it over, and very nearly didn't.
It has am induction kit, and full milltek, including a decat, and the sound is at least as good as my 911.
Issues we had with the car were, as mentioned before, the plastic bits connecting to the engine went brittle, so new crack pipe, thermostat housing etc. Also needed a rad, and heater matrix. The annoying thing was that everything went at seperate times, but all of the above are common failiures.
whos 'we' lol, just curious We bought and owned it for 3 years. It had 146k when we sold it. Original chain.
I decided to take it for one last drive before handing it over, and very nearly didn't.
It has am induction kit, and full milltek, including a decat, and the sound is at least as good as my 911.
Issues we had with the car were, as mentioned before, the plastic bits connecting to the engine went brittle, so new crack pipe, thermostat housing etc. Also needed a rad, and heater matrix. The annoying thing was that everything went at seperate times, but all of the above are common failiures.
Reviving a old thread.
I have now had my corrado G60 back on the road for 5 weeks. I do agree the gearbox is really awkward at first especially compared to the VR6/16v. Not being able to hit 60mph in 2nd is a slight issue if we want to talk 0-60 time but not as much of a problem on the open road. 3rd, 4th and 5th are outstanding, the in gear acceleration from 70-100+ is far superior to my 2.0 16v and not far off the 2.9vr. One solution which i am looking into is a Diesel CTN code gearbox which offers the same final drive but taller ratios 1st -3rd or perhaps just swapping a VR6 1st an 2nd which will even the box out.
So far in terms of modifications to the G60 i have removed the silencer to the air box and added a cold air feed, already the engine feels more responsive but the real difference is being able to hear the charger whine a bit more :-)
On back to back drives in a VR6, G60 and 16v variations the 16v now feels limited below 4000rpm and you really ring its neck to 7000, where the G60 is relly starting to boast from 3000 and provides good power up until 5700, the VR6 is still quite dosile but then from 4000- 6000 delivers i huge slab of power and the tall gears make it feel so effortless.
In terms of MPG, the G60 has been averaging around 28 on mixed driving, down to 20 when pushing on but up to 42 on the motorway, the VR gets no where near 40 and 30 is doing well (£20 of fuel gone in a afternoon of back road fun lol) The 16v has always been around 26-32.
On balance i have to say im really struggling to pick a favourite as each has its unique features, the best would be a VR6 with a supercharger but until then a a tuned G60 is easily more fun than a NA VR as the handling difference between them even in stock is very noticible. My g60 feels nimbler than the VR.
I have now had my corrado G60 back on the road for 5 weeks. I do agree the gearbox is really awkward at first especially compared to the VR6/16v. Not being able to hit 60mph in 2nd is a slight issue if we want to talk 0-60 time but not as much of a problem on the open road. 3rd, 4th and 5th are outstanding, the in gear acceleration from 70-100+ is far superior to my 2.0 16v and not far off the 2.9vr. One solution which i am looking into is a Diesel CTN code gearbox which offers the same final drive but taller ratios 1st -3rd or perhaps just swapping a VR6 1st an 2nd which will even the box out.
So far in terms of modifications to the G60 i have removed the silencer to the air box and added a cold air feed, already the engine feels more responsive but the real difference is being able to hear the charger whine a bit more :-)
On back to back drives in a VR6, G60 and 16v variations the 16v now feels limited below 4000rpm and you really ring its neck to 7000, where the G60 is relly starting to boast from 3000 and provides good power up until 5700, the VR6 is still quite dosile but then from 4000- 6000 delivers i huge slab of power and the tall gears make it feel so effortless.
In terms of MPG, the G60 has been averaging around 28 on mixed driving, down to 20 when pushing on but up to 42 on the motorway, the VR gets no where near 40 and 30 is doing well (£20 of fuel gone in a afternoon of back road fun lol) The 16v has always been around 26-32.
On balance i have to say im really struggling to pick a favourite as each has its unique features, the best would be a VR6 with a supercharger but until then a a tuned G60 is easily more fun than a NA VR as the handling difference between them even in stock is very noticible. My g60 feels nimbler than the VR.
VAG said:
Tino said:
Another ex VR6 owner here.
We bought and owned it for 3 years. It had 146k when we sold it. Original chain.
I decided to take it for one last drive before handing it over, and very nearly didn't.
It has am induction kit, and full milltek, including a decat, and the sound is at least as good as my 911.
Issues we had with the car were, as mentioned before, the plastic bits connecting to the engine went brittle, so new crack pipe, thermostat housing etc. Also needed a rad, and heater matrix. The annoying thing was that everything went at seperate times, but all of the above are common failiures.
whos 'we' lol, just curious We bought and owned it for 3 years. It had 146k when we sold it. Original chain.
I decided to take it for one last drive before handing it over, and very nearly didn't.
It has am induction kit, and full milltek, including a decat, and the sound is at least as good as my 911.
Issues we had with the car were, as mentioned before, the plastic bits connecting to the engine went brittle, so new crack pipe, thermostat housing etc. Also needed a rad, and heater matrix. The annoying thing was that everything went at seperate times, but all of the above are common failiures.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff






