Audi 80 TDi hunting at idle
Audi 80 TDi hunting at idle
Author
Discussion

7ommy

Original Poster:

299 posts

220 months

Tuesday 27th July 2010
quotequote all
Hopefully someone can give some suggestions, it's an old 1994 beast with 217k on the clock and has run fine for the 5000 miles i've done in the last 2 and a bit months. However this morning once it started it hunts on idle between 800 and 1400 rpm and as it's an auto this means interesting times in traffic.
my friend offered to use his vag com on it but its too old and has the twin plug diagnostic port and wondered if anyone here had some ideas

thanks in advance

istoo

2,365 posts

233 months

Tuesday 27th July 2010
quotequote all
not sure if the tdi has an Idle Stablisation Valve but these are a solenoid which can get really sticky had it in my 80quattro.
http://www.20v.org/engprob.htm
Give it a bloody good clean to establish if thats the issue.

warmfuzzies

4,379 posts

284 months

Wednesday 28th July 2010
quotequote all
Mine had this when we first bought it in 1996, turned out to be a fuel pump issue which the local diesel specialist in Suffolk sorted after Audi couldn't, I think it was governer related.

No costs or more details though as done under warranty.

kevin

istoo

2,365 posts

233 months

Thursday 29th July 2010
quotequote all
[quote=7ommy
my friend offered to use his vag com on it but its too old and has the twin plug diagnostic port and wondered if anyone here had some ideas

[/quote]

missed that bit, not too old for diagnostics, just the older 2x2 port. A garage should be able to read it for you, i would get that done first.

jith

2,752 posts

246 months

Thursday 29th July 2010
quotequote all
istoo said:
[quote=7ommy
my friend offered to use his vag com on it but its too old and has the twin plug diagnostic port and wondered if anyone here had some ideas
missed that bit, not too old for diagnostics, just the older 2x2 port. A garage should be able to read it for you, i would get that done first.
How the hell are you istoo?

You are right of course, and my equipment can diagnose that 7ommy. The only problem is you will have to make it up to Glasgow!!

istoo

2,365 posts

233 months

Thursday 29th July 2010
quotequote all
The OP could of course make a blink code reader, if you can be bothered! £3 from maplins will do it.
http://20v.org/tools.htm

Doing good thanks, Jith fae Glasgow... hmmm could be a few people and I dont recognise the username! go on give us a clue.


jith

2,752 posts

246 months

Thursday 29th July 2010
quotequote all
istoo said:
The OP could of course make a blink code reader, if you can be bothered! £3 from maplins will do it.
http://20v.org/tools.htm

Doing good thanks, Jith fae Glasgow... hmmm could be a few people and I dont recognise the username! go on give us a clue.
Iolaire from Audifans.

istoo

2,365 posts

233 months

Thursday 29th July 2010
quotequote all
Sorry OP...

oh likewise, hope your keeping well sir. Did you kick your garage project off the ground and start a business?

jith

2,752 posts

246 months

Thursday 29th July 2010
quotequote all
istoo said:
Sorry OP...

oh likewise, hope your keeping well sir. Did you kick your garage project off the ground and start a business?
I did that. Have a look at my profile and it will take you into the website.

Lots of nice motors. Pop in and see me next time you're in Glasgow.

Regards,

James.

7ommy

Original Poster:

299 posts

220 months

Friday 30th July 2010
quotequote all
No worries guys, don't think mine has an ISV so have tried replacing some vacuum hoses and this seems to have sorted it in the short term

istoo

2,365 posts

233 months

Friday 30th July 2010
quotequote all
The vac hoses go very brittle, and block very easy. if original 200k+ is a good innings!
I would replace them all as a matter of course.

the 1Z engine will go and go, I know a fair few over 200k and some over 300k!


warmfuzzies

4,379 posts

284 months

Friday 30th July 2010
quotequote all
istoo said:
The vac hoses go very brittle, and block very easy. if original 200k+ is a good innings!
I would replace them all as a matter of course.

the 1Z engine will go and go, I know a fair few over 200k and some over 300k!
Mine had 255k when sold, its a great engine, but take a look at the fuel pump governer will you, mine hunted like a good one until the specialist dealt with it.

k