V6 Timing Belt Question
Discussion
I have a couple of questions regarding the timing belt and the tapered mounts on the camshaft. I have read the manual over and over and I just can't get my head around it. This is for the Audi 2.4 V6, AML engine.
First one, the camshaft sprockets are mounted on the camshaft via tapered mounts. I have heard that removing these will affect the timing if the twin camshaft bracket is not used. I am having difficulty getting my head around this. If the mounts are tapered and don't have any keys then shirley if you remove them and remount them they will go on in any postion and the position of the cam hasn't changed? Sorry if I sound thick I just can't get my head around it.
Edit - do other makes of engine not have tapered mounts and if so how do they differ?
Second. The manual says that after the belt is installed to adjust the timing by fixing the twin camshaft bracket and then tensioning the belt. Again I can't understand this. The bracket locks into the locating plates and I assume the sprockets are free to turn independantly of the cams. What exactly is the bracket doing, because the cams it is locking are on different banks. Again sorry for sounding stoopid.
Can anyone explain this for me?
First one, the camshaft sprockets are mounted on the camshaft via tapered mounts. I have heard that removing these will affect the timing if the twin camshaft bracket is not used. I am having difficulty getting my head around this. If the mounts are tapered and don't have any keys then shirley if you remove them and remount them they will go on in any postion and the position of the cam hasn't changed? Sorry if I sound thick I just can't get my head around it.
Edit - do other makes of engine not have tapered mounts and if so how do they differ?
Second. The manual says that after the belt is installed to adjust the timing by fixing the twin camshaft bracket and then tensioning the belt. Again I can't understand this. The bracket locks into the locating plates and I assume the sprockets are free to turn independantly of the cams. What exactly is the bracket doing, because the cams it is locking are on different banks. Again sorry for sounding stoopid.
Can anyone explain this for me?
Edited by 944fan on Wednesday 18th August 22:45
The cam pulleys once released do move independantly to the camshafts, no key. The oval plate with the two holes in it, either side of the cam pulley bolt is fixed to the camshaft.
To have the timing correct the bar that locks into the holes in these plates with the two holes in must be fitted to ensure the cams dont move during the process. The crank should be locked with a pin also.
With the Crank pinned and the cams locked with the bar as you tension the tensioner the belt rotates the cam pulleys rotate with it, but the crankshaft and camshaft remain still. If you dont use the tools, the crank will definatly move when you set the belt tension and the cams "probably" will also.
If you can make a reference mark so you know absolutely if anything moves, you could try it without the tools, but I wouldnt.

Crank pin and cam bar.
To have the timing correct the bar that locks into the holes in these plates with the two holes in must be fitted to ensure the cams dont move during the process. The crank should be locked with a pin also.
With the Crank pinned and the cams locked with the bar as you tension the tensioner the belt rotates the cam pulleys rotate with it, but the crankshaft and camshaft remain still. If you dont use the tools, the crank will definatly move when you set the belt tension and the cams "probably" will also.
If you can make a reference mark so you know absolutely if anything moves, you could try it without the tools, but I wouldnt.

Crank pin and cam bar.
Edited by Tame Technician on Thursday 19th August 00:20
Thanks for the replys. That makes more sense now. I think I was thinking the plates with the holes are attached to the pulleys not the cams which is why I was confused.

I won't attempt it without the tools, Lazer tools make equivelants to the VAG tools and they are not too much on Ebay. Might buy them and then try and sell them second hand after I have used them. Even if I get half the money back it will be cheaper than paying the labour for someone else to do it.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff




