a6 2.0 td cambelt & water pump
a6 2.0 td cambelt & water pump
Author
Discussion

sja

Original Poster:

509 posts

259 months

Thursday 19th August 2010
quotequote all
Hi all, just had my belt replaced. Long story but supplying dealer initially said he would do this, then I got him to stump up for tyres. I supplied a water pump today when he said he would replace the belt... I have a nagging suspicion he hasnt carried out the work and kept the pump! (not an Audi main dealer)

Is there and easy way with the bonnet open I can see if these have bothe been replaced? Im probably being silly but just have this nagging doubt. Where I think teh water pump sits it certainly doesnt look like the new one..

Also the bonnet doesnt seem to be sitting correctly, is this supposed to have a gap at the froont above and to the side of the grille? just doesnt look right.. God his car is making me paranoid!

Tame Technician

2,467 posts

235 months

Thursday 19th August 2010
quotequote all
Take the cam belt cover off (only three spung clips) see if the belt looks new. A new belt will be black with clear white writing on it.

Older belts tend to go a bit brown, and the print on them fades and is less vivid.

If the grill or bonnet or head lamp alignement is iffy, I'd say they have definatly done the belt. As lining that lot up, after pulling the front end intot he belt change position on the A6 is real pain.

Drive it at night and or shine the lights a a garage door + look at the bumper hight under teh head lights make sure you are happy with it all. If not take it back and point out the problems.

You pay more at a main dealer for a reason.


00161wj

566 posts

239 months

Thursday 19th August 2010
quotequote all
I dont see why people take the front end off to fit a cambelt on A4's / A6's. I certainly wouldnt on an A6 theres loads of room, and you can always tell when a front ends been off, therefore making it look like its been involved in an accident!

sja

Original Poster:

509 posts

259 months

Thursday 19th August 2010
quotequote all
Cheers, sorry where is the cambelt cover? Anyone got a nice pic with arrows?
The headlamps look fine, its just the gap around the grill.. I have had a quick look at a few pics in teh classifieds and teh ones for sale look the same (ish)

Is it easy to adjust? I have heard talk of putting engine in service position, whats this entail?


Tame Technician

2,467 posts

235 months

Thursday 19th August 2010
quotequote all
00161wj said:
I dont see why people take the front end off to fit a cambelt on A4's / A6's. I certainly wouldnt on an A6 theres loads of room, and you can always tell when a front ends been off, therefore making it look like its been involved in an accident!
I do on A4, but dont on A6, the headlamps and everthing have to be removed on A6.

A4 is easy to get to look factory afterwards and it make life alot easier when seting up the tensioner etc.


Tame Technician

2,467 posts

235 months

Thursday 19th August 2010
quotequote all
sja said:
Cheers, sorry where is the cambelt cover? Anyone got a nice pic with arrows?
The headlamps look fine, its just the gap around the grill.. I have had a quick look at a few pics in teh classifieds and teh ones for sale look the same (ish)

Is it easy to adjust? I have heard talk of putting engine in service position, whats this entail?
I cant find a propper picture, this is an A3 so the engine is facing the oposite way, but the engine is basically the same. The came belt cover is the bit with the bar code on.




sja

Original Poster:

509 posts

259 months

Friday 20th August 2010
quotequote all
Mmm. LLoks liek I donnt have a cam cover.. When its stops rain I'll takee a pic of the engine bay and bonnet gaps. Looks lie they may have forgot to put the cambelt cover back on..

Tame Technician

2,467 posts

235 months

Friday 20th August 2010
quotequote all
has it stoped raining yet. I cant beleive they would leave it off.

sja

Original Poster:

509 posts

259 months

Friday 20th August 2010
quotequote all
It has just but to dark. I'll get some pics up tomorrow. From the front of engine if I look directly behind front grill I can see a belt, it's not covered. Excuse my ignorance of this engine! Had a look at another a6 today in a car park, bonnet looks the same bar one or two mm

00161wj

566 posts

239 months

Friday 20th August 2010
quotequote all
I wouldnt go in kicking off if you dont know the difference between a cambelt and an auxillery belt.

sja

Original Poster:

509 posts

259 months

Saturday 21st August 2010
quotequote all
Had no intention of "kicking off" as your right I no nothing about engines.. Anyway thanks tame technician found the cover but still can't get it off to have a look, going to have another go later. Cheers

sja

Original Poster:

509 posts

259 months

Wednesday 25th August 2010
quotequote all
Cover easily removed and a nice new belt installed, feel a bit guilty doubting them. No idea if they did water pump though, but I'm sure they have.. Cheers..

loko

313 posts

195 months

Wednesday 25th August 2010
quotequote all
i,ve just had the belt changed on mine and was asked if i wanted the water pump doing at the same time,i was told there would be no labour charge i would just have to pay £34 for the pump, quite impressed really, cambelt,water pump and an oil and filter change for £305 {that was an independent and not audi btw}

fatboy b

9,666 posts

247 months

Thursday 26th August 2010
quotequote all
loko said:
i,ve just had the belt changed on mine and was asked if i wanted the water pump doing at the same time,i was told there would be no labour charge i would just have to pay £34 for the pump, quite impressed really, cambelt,water pump and an oil and filter change for £305 {that was an independent and not audi btw}
Mrs got charged about the same for her Seat Leon 2,0 TDI. Main dealer wanted about £600. That's why we go to independants rather than main stealers.