replacing discs and pads on a mk5 golf gti
Discussion
has anyone done it? i was going to go down the usual put it into a dealer to get it done, and then i thought i would try it myself... after all (famous last words) how hard could it be? so after some careful due diligence (watched a few youtube clips of replacing pads on completely different american cars) i decided i have (most of) the tools and the brains to do this myself.
the one question... when compressing the piston back into the caliper after removing the old pads to make way for the new pads, the use of a c clamp to compress it back in may not be possible as you may need a twist and push motion applied. can anyone confirm this? if so where can i get an appropriate cube tool to help with this part? i am replacing only the front pads and discs. rears apparently are fine.
any advice is much welcome.
i will gladly post my success / failure to do this 'simple' task after the weekend when i intend to get down and dirty with my spanners.
the one question... when compressing the piston back into the caliper after removing the old pads to make way for the new pads, the use of a c clamp to compress it back in may not be possible as you may need a twist and push motion applied. can anyone confirm this? if so where can i get an appropriate cube tool to help with this part? i am replacing only the front pads and discs. rears apparently are fine.
any advice is much welcome.
i will gladly post my success / failure to do this 'simple' task after the weekend when i intend to get down and dirty with my spanners.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


