Golf Mk4 pendulum mount
Discussion
My son's MK4 Golf has just snapped it's pendulum mount bolt, the mount it's self is okay but it looks like the bolt that secures it to the engine has sheared off leaving the remains inside the the bottom of the engine. Anybody know if this is a self fix or will it need to go to the garage? Not that mechanically minded and no access to ramps etc. If garage any idea how much it may cost him?
Surprising... the pendulum mount itself bolts to a short metal pressing which bolts to the underside of the gearbox. It would usually be this pressing which fatigues and breaks (?) rather than the bolt into the gearbox.
If the metal pressing is broken it would be a fairly straightforward DIY job to replace it, with the car up on axle stands or DIY ramps. If the bolt into the gearbox has broken then it will require drilling and extracting with an Eezi-out tool, (usually) a relatively easy job for a garage.
Yes it is the bolt that has sheared leaving the pressing still attached to the gearbox. Think the centre of the Pendulum mount should have a small sleeve that inserts into the the middle of the pressing before the bolt slides through and I think that has come off as well. Going to the VW garage in the morning (shut today when I got there)to see.
Do you know if there is a way of drilling out the bolt without the use of a special tool? I was thinking along the lines of starting with a small drill and gradually increasing the size until I could insert an old screwdriver and hopefully get enough purchase to loosen off?
Do you know if there is a way of drilling out the bolt without the use of a special tool? I was thinking along the lines of starting with a small drill and gradually increasing the size until I could insert an old screwdriver and hopefully get enough purchase to loosen off?
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


