Camshaft Oil Seals
Author
Discussion

944fan

Original Poster:

4,962 posts

216 months

Friday 3rd September 2010
quotequote all

I'm going to tackle my now overdue timing belt shortly. I also have a nasty oil leak from the back of the engine. I suspect it is either the cam adjuster gasket or the camshaft oil seals. Rather than fart about I thought I would replace the lot as the gaskets and seals aren't expensive and as I am having the whole front of the car off.

Anyway the manual shows using some special tool to extract the camshaft oil seals. Is this tool only required to remove the seals without removing the cams? I have to remove the cams to change the adjuster gasket so can I just push the seals out without the tool?

I have had to spend £150 on the timing tools so don't really want to have to pay for another tool if I can get away with out it! The engine is a 2001 2.4 V6 AML

Tame Technician

2,467 posts

235 months

Saturday 4th September 2010
quotequote all
If the cams are coming out, the seals will just slide off. You need to be very carefull putting them on as the lip of the seal can roll over as it slides onto the camsaft, there is a tool to combat this, but with the cams out you should be able to do it without.

You will need a tool to compress the cam chain tentioner to remove the cams, tool is just a bolt with a plastic chain slipper on the end. If you get a new tensioner it comes with one in, anyone thats worked on 1.8T's or the older V6s will have a few.

Looks like this,



Edited by Tame Technician on Saturday 4th September 14:59

944fan

Original Poster:

4,962 posts

216 months

Monday 6th September 2010
quotequote all
Thanks TT, spot advice as always. beer Glad it I can do the seals without another tool. I have got the tensioner compressing tool, Laser do a clone of the VAG one, I bought it when I got the got the timing tools.

Just need a few free days to tackle it now!