Lupo - Turbo
Author
Discussion

LupoSport16V

Original Poster:

15 posts

194 months

Wednesday 15th September 2010
quotequote all
Firstly this is my first post so hello all.

Right I have a VW Lupo 1.4 16v running 120bhp.
I have uprated manifold, full exhaust system, air filter and suspension.

I'm looking to turbo charge her to try get her running about 160-170bhp.
I just want to know if anyone knows how much the internal's can take before having to forge and so on.

Advise/comments would be great.

Cheers

Dr G

16,009 posts

273 months

Wednesday 15th September 2010
quotequote all
Welcome to Pistonheads; it's not often I'll say 'Pistonheads can't help' as the body of knowledge on here is massive but that's a really rather specialised question!

Have you tried club lupo?


LupoSport16V

Original Poster:

15 posts

194 months

Wednesday 15th September 2010
quotequote all
Thanks for the welcome.
Yeah I have made a post on there to smile

BoraBora

143 posts

201 months

Wednesday 15th September 2010
quotequote all
dont take this as gospel as i drive a diesel but, i think the internals are pretty robust, its the EGT's that could be worrying (exhaust gas temperatures)

aka_kerrly

12,506 posts

241 months

Thursday 16th September 2010
quotequote all
hello,

the crucial thing to consider is how much boast you want to run when deciding if you need forged internals. I know of a couple of lupos with Eaton superchargers on them running 6-8psi depending on pulley size on stock insides but with a headgasket spacer to reduce the compression. These are wacking out the 160+ hp that you desire.

The advantage of the supercharger is that it can sit and the front of the engine bay although it will requre the front slam panel to be trimmed and the pulley allignment needs to be 100% accurate. Once you have the charger, intercooler an pipework in place your next hurdle will be management, Emerarald/Megasquirt/DTA are the sort of things you will end up with. I have heard of people with GTIs running piggyback Ecu chips but not always with great success.

Its a lot more work but have you considered a G40 or 20VT conversion?

dave

LupoSport16V

Original Poster:

15 posts

194 months

Thursday 16th September 2010
quotequote all
Thanks for the detailed reply.

I have thought of engine converstions but I wanted to run a turbo because most Lupo's are supercharged and I want to have something a bit different.

aka_kerrly

12,506 posts

241 months

Thursday 16th September 2010
quotequote all
20Vt will no doubt cost you less in the long run as there are off the shelf wiring harnesses and conversion parts available plus you have a block/internals designed to take forced induction rather than trying to modify your 1.6.

Badger5 motorsportl, Jabba sport or JBS autos would be people to contact regarding 20vt into lupos as i believe they have all built them. The badger5 car lives near me and is a very good conversion, the car almost seems factory.

dave

LupoSport16V

Original Poster:

15 posts

194 months

Thursday 16th September 2010
quotequote all
Ill have a look at the 20v.
But my Lupo is the 1.4 16v.
Can it still be done? Or is there alot more parts/work needed?

Defcon5

6,479 posts

222 months

Thursday 16th September 2010
quotequote all
What about keeping it NA and getting ITBs?

Who me ?

7,455 posts

243 months

Thursday 16th September 2010
quotequote all
Lupo- lot of modding blokes on Briskoda - even some modding techies - might be worth a question on there - they won't mind that it's a VW - some of the techs are VW trained anyway .

LupoSport16V

Original Poster:

15 posts

194 months

Friday 17th September 2010
quotequote all
ITB could be an option worth looking into.
Might be a lot easier then turbo, mainly because where the turbo is placed and my engine bay is cramped.

I'll check out that site, thanks Who Me.

LupoSport16V

Original Poster:

15 posts

194 months

Friday 17th September 2010
quotequote all
ITB could be an option worth looking into.
Might be a lot easier then turbo, mainly because where the turbo is placed and my engine bay is cramped.

I'll check out that site, thanks Who Me.