Modifying an A3 1.8T
Author
Discussion

Freedom88

Original Poster:

2 posts

207 months

Wednesday 22nd September 2010
quotequote all
Hiya guys, i amd thinking of upgrading the turbo on my A3 from the KO3 to the KO3s and as i dont consider myself amazingly knowledgable on these matters i was wondering if anyone would be able to give mea rough idea on how much i should be looking to spend and anything extra that i might have to do should i go through with it (remap being a given of course). I know people who would be able to help with part changing etc so thats not a problem, just want to know what im getting into smile

many thanks,

Jamie

snowmuncher

786 posts

194 months

Wednesday 22nd September 2010
quotequote all
The K03 to KO3S is an improvement, but not a huge one. For only a little bit more ( ), you could be looking at a hybrid K03S (i.e. with K04 internals or custom internals).
On its own, with a map of course, that would get to maybe 240ish

Thing is, you really want to start looking at upgrading other bits too, which does start to rack up the cost.

Other bits of hardware to consider: Cast Manifold; High Flow Fuel Injectors; 3" Air Mass Meter; Forge or CompBrake Diverter Valve; 4 Bar Fuel regulator; 4 Bar Fuel Pump; Sport Exhaust; uprated intercooler (SMIC)
With a decent map, that might be in the region of 280ish

There's lots of debate on this topic, and I'm no expert
Good places you start researching uk-mkivs & here, JBS megabucks hybrid, Turbo (standard/hybrid) rebuilders CR Turbos




Edited by snowmuncher on Wednesday 22 September 09:27

Matt_N

9,047 posts

233 months

Wednesday 22nd September 2010
quotequote all
First off you need the turbo and intake pipe.

A new turbo is around £500-£600 or they can be bought second hand from about £200. If you go second hand get it rebuilt by a reputable company.

A silicon intake pipe, also known as a Turbo Intake Pipe (TIP) can be bought from Forge Motorsport for around £120, it's a good upgrade and looks nice too. Or you should be able to get a normal one for about £40 second hand.

Then I'd get a Forge 007P diverter valve as the standard ones are prone to fail even at standard boost levels.

I'd also get a new panel filter, something like a Green Air one is good, smooth the airbox out and you'll get a small increase in flow. Panel filter is about £35.

Would also be worth getting new gaskets too, turbo to downpipe and turbo to inlet manifold, couple of quid each from Audi.

Then be prepared to slice and scrape your knuckles to pieces trying to fit one of the most inaccesable turbos I have ever seen!

Greendubber

15,389 posts

234 months

Wednesday 22nd September 2010
quotequote all
Better off sorting out the appauling handling first!.

decent spring and shock combo and a hefty front anti roll bat and one on the rear will turn it into a good handling car.

Best money I spent on my A3 by a long way!.

Freedom88

Original Poster:

2 posts

207 months

Sunday 26th September 2010
quotequote all
cheers for all the advice and tips guys, appreciate it. So by the looks of things spending about a grand or so seems about right perhaps? and as for the handling i do agree it rolls a bit too much so will see what i can save and do. If you happen to think of anything else, would be awsome to hear!

ps: any recommendations for a map? i live in swansea but dnt mind travelling to be honest, id rather spend the extra n get aa good job done of course