A4 1.8 Oil drain bolt. Arrrgghhhh!
Discussion
I can't understand how it can be so tight that it didn't crack the sump, unless it has siezed in. Strange. Anyway, try using a 6 point socket if you havent already, this will grip better than a standard 12 point. If it is badly rounded try getting a slightly smaller imperial socket on it, you might need to tap it on with a hammer. Use a breaker bar but go slowly, you don't want to round it off any more. You could also try an impact wrench if you have access to one.
The other option is to weld another nut to it.
The other option is to weld another nut to it.
Self adjusting pipe wrench, will apply as much torque to a rounded bolt as your arm will!
http://www.amazon.co.uk/Rolson-Tools-18560-Adjusti...
But obviously available slightly less huge, this was just a handy link. Basically a Stilson with a spring so that the harder you pull the harder it grips.
http://www.amazon.co.uk/Rolson-Tools-18560-Adjusti...
But obviously available slightly less huge, this was just a handy link. Basically a Stilson with a spring so that the harder you pull the harder it grips.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff



