Another Tt question
Author
Discussion

iash101

Original Poster:

46 posts

194 months

Saturday 25th September 2010
quotequote all
Iv had the dreaded esp light come on the cars a seat wscfr tdi 170.
I read the codes today and im 99% sure its the abs pump but can you please confirm it.

The reading on the screen read like this.

01435
Brake presure sensor switch 1 (g201)

sporadic 012 electrical circuit

Ecu information
Vag no 1k0907379ac
component esp fron
coding 0006786
imp 0785 wsc 006441

Tame Technician

2,467 posts

235 months

Saturday 25th September 2010
quotequote all
Sadly that is indeed the fault code you get when the it needs an ABS module.

I believe some companies are doing repaires now that replace the faulty pressure sensor, that is inside the ABS module. Audi / VW etc will only replace the ABS module as one component.

But you must check the functionality of the brake pedal switch, that can lead to the fault code you have being logged falesly. But if the brake pedal switch is ok, then it is the fault all A3, TT, Golf customers dread.

http://www.google.co.uk/#q=g201+ecu&hl=en&...


iash101

Original Poster:

46 posts

194 months

Saturday 25th September 2010
quotequote all
Tame Technician said:
Sadly that is indeed the fault code you get when the it needs an ABS module.

I believe some companies are doing repaires now that replace the faulty pressure sensor, that is inside the ABS module. Audi / VW etc will only replace the ABS module as one component.

But you must check the functionality of the brake pedal switch, that can lead to the fault code you have being logged falesly. But if the brake pedal switch is ok, then it is the fault all A3, TT, Golf customers dread.

http://www.google.co.uk/#q=g201+ecu&hl=en&...
I know iv only just bought the car its only done 31000 miles and the last owner didnt get it serviced by a seat dealer I feel SICK!!

When you mention brake pedal switch iv checked the brake lights they are all working does that mean the switch is ok???

Tame Technician

2,467 posts

235 months

Saturday 25th September 2010
quotequote all
iash101 said:
Tame Technician said:
Sadly that is indeed the fault code you get when the it needs an ABS module.

I believe some companies are doing repaires now that replace the faulty pressure sensor, that is inside the ABS module. Audi / VW etc will only replace the ABS module as one component.

But you must check the functionality of the brake pedal switch, that can lead to the fault code you have being logged falesly. But if the brake pedal switch is ok, then it is the fault all A3, TT, Golf customers dread.

http://www.google.co.uk/#q=g201+ecu&hl=en&...
When you mention brake pedal switch iv checked the brake lights they are all working does that mean the switch is ok???
If the brake lights come on, very soon in the travel of the pedal, ie before the car would start to slow down from brake effort, then the brake light switch is ok.

The G201 fault can occur spiriously, if the brake light switch is causing the brake lights to come on too late, further down the pedal travel. So the G201 sensor sees brake line pressure before the brake pedal switch has been activated. This usually only happens when the switch has been badly adjusted or partially broken off it mount.

iash101

Original Poster:

46 posts

194 months

Saturday 25th September 2010
quotequote all
Thankyou for your time, much apreciated Tt I shall check it out tomorrow.
Just a thought if i cant see any damage to the switch could i try adjusting it so it switches a bit earlyer.
once again Cheers!!!!

buzzer

3,621 posts

271 months

Sunday 26th September 2010
quotequote all
give these companies a try if you need an ABS module

http://www.ecutesting.com/index.html

http://www.bba-reman.com/uk/index.aspx


AcidReflux

3,211 posts

285 months

Monday 27th September 2010
quotequote all
buzzer said:
These guys fixed the broken ABS module on my '99 A6 for about £100 and it worked fine since. Took a few days but at that price it's hard to criticise them.