The dreaded decision
Discussion
Hi guys. Sorry dont post much, usually just lurk around.
Anyways, the time has come for me to decide what to do with my VR. As I've been largely away travelling the last bit, I've kept my VR off the road (underground garage) for the past 3 months. Its MOT has expired, and its now come up on its 120k service (timing chains), and will need new tires for MOT. If I were to do the work, it would probably be worth while re-doing valve stem seals, as it puffs a little smoke if you coast for a while, and come back on throttle.
So, to get it back and tip top, I guess I'm looking at about £2k. There is a small rust bubble on the left hand quarter panel, and I had some welding done two years ago on the undercarriage to sort out a little rust, but otherwise the car is in pretty good nick. Its also nicely set up, with a Bilstein B12 kit, and did a run to the 'Ring flawlessly not to long ago.
Do you guys think its worth it spending the money on it, or should I scrap it? I have an issue scrapping such a lovely car, but I'm also trying to be more "financially responsible", as I blow silly money on cars usually.
Also, does anyone know a good place between London and Kent/Maidstone that can be trusted to carry out the work should I take that route?
Here she is.

Anyways, the time has come for me to decide what to do with my VR. As I've been largely away travelling the last bit, I've kept my VR off the road (underground garage) for the past 3 months. Its MOT has expired, and its now come up on its 120k service (timing chains), and will need new tires for MOT. If I were to do the work, it would probably be worth while re-doing valve stem seals, as it puffs a little smoke if you coast for a while, and come back on throttle.
So, to get it back and tip top, I guess I'm looking at about £2k. There is a small rust bubble on the left hand quarter panel, and I had some welding done two years ago on the undercarriage to sort out a little rust, but otherwise the car is in pretty good nick. Its also nicely set up, with a Bilstein B12 kit, and did a run to the 'Ring flawlessly not to long ago.
Do you guys think its worth it spending the money on it, or should I scrap it? I have an issue scrapping such a lovely car, but I'm also trying to be more "financially responsible", as I blow silly money on cars usually.
Also, does anyone know a good place between London and Kent/Maidstone that can be trusted to carry out the work should I take that route?
Here she is.

Killboy said:
I have an issue scrapping such a lovely car, but I'm also trying to be more "financially responsible", as I blow silly money on cars usually.
I think you've answered your own question, if its worth it to you do it, if not, bin it. VR6 is a nice motor to have and keep running.Ignore the rust, ignore the blue smoke (they all do that, breather system design as much as stem seals/guides)
If the chains arent rattling or causing engine running problems they dont need changing. No service interval.
Buy some new tyres and what ever else the MOT man finds, and enjoy another years motoring. Then sell it for at least £1000, and pat yourself on the back for your finacial responsibility.
If the chains were to brake and blow up the engine (never ever ever seen or heard of the VR6 actually breaking chains, just rattle) then you wont feel bad if you have to break it up.
If the chains arent rattling or causing engine running problems they dont need changing. No service interval.
Buy some new tyres and what ever else the MOT man finds, and enjoy another years motoring. Then sell it for at least £1000, and pat yourself on the back for your finacial responsibility.
If the chains were to brake and blow up the engine (never ever ever seen or heard of the VR6 actually breaking chains, just rattle) then you wont feel bad if you have to break it up.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


