MK2 Golf GTI 16V engine rebuild
Discussion
Chaps,
I'm looking for some leads or contacts for garages or specialists you could recommend to rebuild a standard MK2 Golf GTI 16V engine and also have the gearbox rebuilt.
I don't really want an uprated engine as I want to keep the car as close to standard as possible and I want to retain the original engine number etc.
I recently bought a 1991 oak green MK2 16V which only had one owner from new and a full VWSH but has done 250K miles on the original engine and gearbox. Now nothing has happened but I would apprecaite some contacts if you can.
Ideally I'd like to use someone in the south east, I'm based on the Herts/Essex borders, but would obviously consider further a field if someone is highly recommended.
I appreciate this is a 19 year old Golf but it is quite unique in ownership terms and history and it is a car I am never going to sell.
Thanks.
I'm looking for some leads or contacts for garages or specialists you could recommend to rebuild a standard MK2 Golf GTI 16V engine and also have the gearbox rebuilt.
I don't really want an uprated engine as I want to keep the car as close to standard as possible and I want to retain the original engine number etc.
I recently bought a 1991 oak green MK2 16V which only had one owner from new and a full VWSH but has done 250K miles on the original engine and gearbox. Now nothing has happened but I would apprecaite some contacts if you can.
Ideally I'd like to use someone in the south east, I'm based on the Herts/Essex borders, but would obviously consider further a field if someone is highly recommended.
I appreciate this is a 19 year old Golf but it is quite unique in ownership terms and history and it is a car I am never going to sell.
Thanks.
Edited by Andy OH on Thursday 30th September 13:02
Dr G,
I called BR Motorsport, they still exist but do not do this type of work any longer and they said they haven't for the past ten years.
However, I had a very positive conversation with Voodoo Motorsport and the are not that far away from me. They are obviously very busy as they do not have a slot for a job like this until next July.
I will take a visit over there before I committ to having the work done by them as I have been burnt quite badly before when I had some engine work for an E30 M3 carried out by what turned out to be an absoulte w
r of an engine builder which almost ended up in court.
Thanks for the recommendations.
I called BR Motorsport, they still exist but do not do this type of work any longer and they said they haven't for the past ten years.
However, I had a very positive conversation with Voodoo Motorsport and the are not that far away from me. They are obviously very busy as they do not have a slot for a job like this until next July.
I will take a visit over there before I committ to having the work done by them as I have been burnt quite badly before when I had some engine work for an E30 M3 carried out by what turned out to be an absoulte w
r of an engine builder which almost ended up in court.Thanks for the recommendations.
Edited by Andy OH on Thursday 30th September 15:01
what kind of work are you thinking of having done and what is the engine like now? does it smoke or burn/use oil?
When i rebuilt mine i went for:
Head
new inlet and exhaust valves
8 new exhaust valve guides
tripple cut valves
new valve stem seals
mild porting/polishing of the inlet/exhaust ports
new cam chain
skimmed 40tho ( the head had never been skimmed before so we took a little extra off to raise the compression)
That lot set me back just under £300 as i didnt do all the work
Block
decked block
new oil pump
new water pump
oilways an coolant channels cleaned out - remove blanks on block to gain access
new oil pick up pipe
MK3 ABF headgasket kit with tripple layer steel gasket
new headbolts
cambelt kit + tensioner + all belts+pulleys
again this was about £200 parts
A set of piston rings will set you back another £80 in parts, something i didnt have done at the time which would have been a good plan but oh well.
nearly all my parts came from carpartsonline.co.uk or VW.
When i rebuilt mine i went for:
Head
new inlet and exhaust valves
8 new exhaust valve guides
tripple cut valves
new valve stem seals
mild porting/polishing of the inlet/exhaust ports
new cam chain
skimmed 40tho ( the head had never been skimmed before so we took a little extra off to raise the compression)
That lot set me back just under £300 as i didnt do all the work
Block
decked block
new oil pump
new water pump
oilways an coolant channels cleaned out - remove blanks on block to gain access
new oil pick up pipe
MK3 ABF headgasket kit with tripple layer steel gasket
new headbolts
cambelt kit + tensioner + all belts+pulleys
again this was about £200 parts
A set of piston rings will set you back another £80 in parts, something i didnt have done at the time which would have been a good plan but oh well.
nearly all my parts came from carpartsonline.co.uk or VW.
The engine doesn't smoke, it burns a little oil but nothing dramaticand I regularly check the oil level (literally before every drive) it doesn't get driven that much. I'm only thinking about a rebuild as it has done 250K miles and as I am never selling it I would like it to last for many more years, however, the engine may be ok for the little use it now gets, but I don't mind spending money on it should it need to be done.
I see, in which case id suggest a compression test, oil pressure test (2bar at 2k revs when hot) analysis of the CO2 and a dyno run to get an idea of how healthy the engine is. Then you are probably better off leaving it be but doing some preventative maintenance.
Essentially it's more a task of ensuring the engines lubrication, cooling systems, the timing/ignition/fueling are all set fine and in good working order and your engine will continue for many more miles. There are 16v engines on over 300k!
dave
Essentially it's more a task of ensuring the engines lubrication, cooling systems, the timing/ignition/fueling are all set fine and in good working order and your engine will continue for many more miles. There are 16v engines on over 300k!
dave
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff



