A3 tdi 2lt bad starting
Author
Discussion

Z4MFarmerpalmer

Original Poster:

37 posts

229 months

Friday 8th October 2010
quotequote all
Hi all, have a 2lt tdi (53 plate, 82k), it does not get used all the time, prob one or twice a month. On trying to start it, it appears to hydraulic, or feels as such, stalls the starter motor, even with jumps on it, changed batt, get it going and it`s fine, you can stop/start and it`s fine, leave it a couple of days and it appears to lock up again when the engine turns over. It does use a drop of water (nothing major mind), water clear, no oil etc in header tank. Is this the case of a cracked head (common on these?) ie crack opens when cool and closes up when hot? It runs fine, once going. Or is the gasket shot? It is mapped, although always warm before giving it the beans.
Ideas?
thanks C

Tame Technician

2,467 posts

235 months

Saturday 9th October 2010
quotequote all
Yes it could be porus head letting coolant into the cylinders.

Using coolant feeling like its hydrauliced on cold start are text book symptoms.

!BUT! it could turn out to be faulty starter motor or resitance in the starter cable, or even the ignition switch (quite common) new head is £1000 part so check out everything else first.

Z4MFarmerpalmer

Original Poster:

37 posts

229 months

Saturday 9th October 2010
quotequote all
Thanks TT, we have put some K-seal in for now to see if it stops the issue, that way we can be sure it`s either the head or not, ie if still problems with starting, we can look at starter etc.
Is a new head to an improved spec than the old, ie will it go porus as well over time?

Tame Technician

2,467 posts

235 months

Sunday 10th October 2010
quotequote all
They are a new part number, so the head has been updated in some way.

We have changed one or two, and none have ever come back.