Help Please- A8 Throttle Actuator
Help Please- A8 Throttle Actuator
Author
Discussion

pat27pat

Original Poster:

29 posts

231 months

Friday 8th October 2010
quotequote all
My A8 D3 3.0 Tdi is showing an emisions fault . The code is P2108 and it is the Throttle Actuator Control Module . Exactly what is one of these, where is it and is any maintenance (ie lubrication) possible?

Tame Technician

2,467 posts

235 months

Saturday 9th October 2010
quotequote all
Throttle Actuator Control Module is Audi speak for throttle body.

TDI's dont really have a throttle body, but a shut off valve that closes the air off to make the engine stop when you turn it off.

You can final controll it with a hose off and see if it moves, of it doesnt its deffective.

You cant usually tell its faulty as the Common rail engines shut down quite smoothly anyway.

pat27pat

Original Poster:

29 posts

231 months

Saturday 9th October 2010
quotequote all
Thanks Tame Technician - Interestingly enough the car is not shutting down straight away- it hesitates for a moment as if it is going to run on! More interesting is that I had filled up with Shell Fuelsave a couple of days before ,and having looked on a few forums it appears that I am not the only person to get these sort of problems!

Tame Technician

2,467 posts

235 months

Sunday 10th October 2010
quotequote all
Well it definatly needs a new intake flap/throttle body assembly then.



Fuel would have no impact on the flap, as it never touches it or effect it in any way.


This might sound a bit ironic, but dont believe all you read on internet forums.