mk4 golf
Author
Discussion

crossley

Original Poster:

1 posts

193 months

Friday 22nd October 2010
quotequote all
Hi just tryin to find some one with a bit of know how who may know wot is wrong with my car.
Well the problem is my car keeps cutting out when coming to a stand still and the revs seem to fluctuate when stationary and thats if it doesnt cut out first.
I have had this on a computer at a local vw specialist who says there are no problem folts and there is the slight problem of only getting only 26mpg which i know isnt much for a 1.4 16v golf
any help with would be gratefully receaved.

3sixty

2,963 posts

230 months

Sunday 24th October 2010
quotequote all
Not sure if its same for you, but the cutting outs on mine were down to the MAF and the revs wandering just required a cleaning and a re-alignment of the throttle body.

Silver940

3,967 posts

258 months

Sunday 24th October 2010
quotequote all
Throttle body cleaning.

Matt_N

9,047 posts

233 months

Monday 25th October 2010
quotequote all
Unplug the MAF whilst the car is idling.

If the idle improves the MAF is dud, if it worsens then it's something else.

May also be worth cleaning the throttle body out if its particulary gunky.

mfmman

3,259 posts

214 months

Monday 25th October 2010
quotequote all
Hi

Similar symptoms on my wife's golf Mk4 1600 (although including hesitation on throttle application) were diagnosed as a faulty flywheel sensor. Cost about £90.00 inc fitting but they did pick this up using the diagnostics tool.


LuS1fer

43,568 posts

276 months

Monday 25th October 2010
quotequote all
Similar symptoms on my Mk 3 GTI which despite cleaning, persisted. However, I took a big can of carb cleaner and sprayed the inlet and TB thoroughly. this didn't stop it so I also sprayed into every pipe attached to the inlet and let it soak and this seems to have effected a cure. Whether it is temporary remains to be seen but it's been good for 2 weeks so far where normally it would stall, especially when cold.