American tool for cam belt replacement?
Discussion
Hi
Probably one for Tame Technician
I have been on the phone to the garage who did my cam belt before and after a change of ownership they are telling me my engine V6 TDI 2.5 2003 is a special engine and they need a special tool only available in the US to lock everything in place.
It sound like
1) they have broken something
2) don't want to admit it
3) or they don't want to do the work.
Do you need a special tool from the us to change a cambelt on a v6 tdi?
How can I check what they did?
Kind regards
Jack Morgan-Smith
Probably one for Tame Technician
I have been on the phone to the garage who did my cam belt before and after a change of ownership they are telling me my engine V6 TDI 2.5 2003 is a special engine and they need a special tool only available in the US to lock everything in place.
It sound like
1) they have broken something
2) don't want to admit it
3) or they don't want to do the work.
Do you need a special tool from the us to change a cambelt on a v6 tdi?
How can I check what they did?
Kind regards
Jack Morgan-Smith
Just about every cam belt requires special tools.
There is not just one tool to do the 2.5TDI belt, there are about 5.
A crank locking tool
A pin to lock the injection pump
Two camshaft locking wedges
special socket to tighten the pump drive belt tensioner
you also need a special small puller to pop the top pulleys off.
The 2.5TDI engine isnt special its just a pain, a bit complicated.
Tools are available from any Audi centre or TPS, But you would need to know the numbers to order them, the parts dept cant look up a tool number from a description.
Or Sealey, Mac and Snap-on will have kits available.
http://www.google.co.uk/products?hl=en&safe=of...
There is not just one tool to do the 2.5TDI belt, there are about 5.
A crank locking tool
A pin to lock the injection pump
Two camshaft locking wedges
special socket to tighten the pump drive belt tensioner
you also need a special small puller to pop the top pulleys off.
The 2.5TDI engine isnt special its just a pain, a bit complicated.
Tools are available from any Audi centre or TPS, But you would need to know the numbers to order them, the parts dept cant look up a tool number from a description.
Or Sealey, Mac and Snap-on will have kits available.
http://www.google.co.uk/products?hl=en&safe=of...
Edited by Tame Technician on Friday 12th November 11:52
OR to put it another way.
Imagine you a local indy garage who work on all makes of car.
You might have to buy all these tools, and use them once or twice.
http://www.justoffbase.co.uk/Tool-Shop?search=lock...
Imagine you a local indy garage who work on all makes of car.
You might have to buy all these tools, and use them once or twice.
http://www.justoffbase.co.uk/Tool-Shop?search=lock...
Not sure I entirely understand the problem, they did the belt for you before, but now they say they cant because they dont have the tooling? So your worries they did it before without the correct tooling, is that it.??
You can fit belts without the tools, but you have to use crude methods like painted marks to line things up, this can result in a mistimed engine. But if performance is ok and they is no change in how the engine idles smokes etc between before and after the belt change, then there is nothing to worry about.
You can fit belts without the tools, but you have to use crude methods like painted marks to line things up, this can result in a mistimed engine. But if performance is ok and they is no change in how the engine idles smokes etc between before and after the belt change, then there is nothing to worry about.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


