Can't fit CD player.
Author
Discussion

souffwest

Original Poster:

153 posts

218 months

Thursday 16th December 2010
quotequote all
Hey there, I have just purchased an old MK3 Golf.

The cd player in it was a horrible old thing and worked occasionaly.

So I decided to take it out and put my new Xplod headunit in.

Took the old unit out, and the wiring is completely different to any I have seen before, it has plastic connector, connecting about three wires. Like choc blocks but long instead?



I thought it was just unclip, then clip the new one in.

I bought the new adapters for it, but I have never seen any like these before..

I could not get pics because it's too dark.. I will try to find an example.

MacW

1,352 posts

207 months

Thursday 16th December 2010
quotequote all
Did the same thing in a Mk3 GTI about 4 years ago, IIRC if you pull on the cables a bit you'll find the standard connectors a bit further back.

CoolC

4,513 posts

245 months

Thursday 16th December 2010
quotequote all
Mk3 Golf should have a standard ISO connector. But they had a habbit of getting broken into and radio's stolen back in the day, so it could be a replacement one already in there.

souffwest

Original Poster:

153 posts

218 months

Friday 17th December 2010
quotequote all
It is so basic. Not the kind of kit you can buy from halfruads.

I got no CD player now frownfrown

CoolC

4,513 posts

245 months

Friday 17th December 2010
quotequote all
Do you have a picture of the connector in the car?

souffwest

Original Poster:

153 posts

218 months

Friday 17th December 2010
quotequote all
No. I will try and take some later though.

I was talking to me step father last night and he said 'back in his day' they didn't have ISO connectors, so you had to find each cable and connect manually?

Matt_N

9,047 posts

233 months

Friday 17th December 2010
quotequote all
souffwest said:
No. I will try and take some later though.

I was talking to me step father last night and he said 'back in his day' they didn't have ISO connectors, so you had to find each cable and connect manually?
Yeh you did.

Sounds like someone has just hard wired each wire together.

If you're handy with a soldering iron you can do it again for the new stereo or take it to an auto electrician to do, they should be able to wire in a new ISO connector.

CoolC

4,513 posts

245 months

Friday 17th December 2010
quotequote all
I Found this on another site:

another site said:
P o w e r
Memory (+12v Constant) Red
Ignition (+12v Switched) Black (not available in older models)
Ground (-) Brown
Illumination Gray or Gray/Blue
Dimmer (none)
Power Antenna White
S p e a k e r s
Right Front (+) Red
Right Front (-) Brown/White
Left Front (+) Blue
Left Front (-) Brown/Blue
Right Rear (+) Red/Green
Right Rear (-) Brown/Black
Left Rear (+) Blue/Green
Left Rear (-) Brown/Red
I used to have a little book with all the wire colours when I was fitting radios, but that was 10+ years ago now and I can't remember them off hand, so these look correct, but check carefully before wiring up.

graham22

3,328 posts

236 months

Friday 17th December 2010
quotequote all
Wasn't there something with VAG cars of thst era where the switched live & permanent live were opposite to other ISO plugs - you either swaped them over or bridged them so the radio was constantly live & had to be manually turned off?

Matt_N

9,047 posts

233 months

Friday 17th December 2010
quotequote all
graham22 said:
Wasn't there something with VAG cars of thst era where the switched live & permanent live were opposite to other ISO plugs - you either swaped them over or bridged them so the radio was constantly live & had to be manually turned off?
Yep, I had to do this on my Mk4 Golf.