55 Plate Passat Injector problem
55 Plate Passat Injector problem
Author
Discussion

Dodgy Zippy

Original Poster:

3 posts

191 months

Saturday 18th December 2010
quotequote all
Hi all,

A not so wealthy friend of mine broke down in his Passat last week. The diag says it has an injector fault. I have disconnected them individually and carried out a resistance check on each one. My multimeter gives pretty much the same figure of 0.2 on all four. Is this a good way to test them or am i wasting my time?

Autogasm

146 posts

230 months

Sunday 19th December 2010
quotequote all
A friend of mine had a similar problem with his Passat, the fault codes was for the injector but the fault was a broken wire in the injector loom which turned out to be a common problem apparently?? The loom was relatively cheap from VW too if memory serves!

cptsideways

13,906 posts

283 months

Sunday 19th December 2010
quotequote all
Yep it'll be the injector wiring loom (I'm 99% sure of it)

The Riddler

6,565 posts

228 months

Sunday 19th December 2010
quotequote all
The injector wiring looms are common, and a lot cheaper than a new injector.


Dodgy Zippy

Original Poster:

3 posts

191 months

Tuesday 21st December 2010
quotequote all
Thank you all for the replies. I'm hoping this is the case. Off to vw to buy a loom. Won't hurt to change it anyway.
Merry christmas